superV
-
Posts
81 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by superV
-
-
-
-
-
delided and now stable 5ghz
windows 7 is terrible at high frequency's.now skips the intro song,and the welcome intro,straight to the desktop ahahahah
finally happy !!!
[mod]*bitching removed*[\mod]
wprime 1024m 5ghz@1.36v
before cinebench wouldnt run even at 1.4v.
now 5ghz@1.37v from bios in override.
-
test made on watercooling,with 20 degrees ambient.
don't mind the efficiency,it was a short test,plug and play
whats ur stock vid on bios?
-
5th 4790k:
L420B770
i have bios stock vid 1.008v and on stock on cpu-z@4.4ghz under load i have 1.136v
for now on water:
4.5ghz@1.12v wprime 1024M temps max 55/52/55/50
4.6ghz@1.12v wprime 1024m temps max 56/53/55/51
4.7ghz@1.14v wprime 1024m temps max 58/56/58/52
4.8ghz@1.18v wprime 1024m temps max 62/60/62/57
4.9ghz@1.25v wprime 1024m temps max 71/69/71/64 with errors
after 4.8 ghz wprime starts to give thread errors and stuff.i need more time to tweak and need to find other testing program.
i dont know why with all 4790k after 4.8 its huge increase of voltage,i think is windows 7.maybe i'll try on 8.1
couldnt run cinebench at 5ghz@1.4v,freezes.i need more time to tweak.
-
very bad.....i'm trying spi on water......1,42v for 4,8ghz ((((((
don't do that face,i should do it.bought 4,all sucked and 4th used sold as new to me.
-
omg omg what a situation.
bought 4th 4790k L420B732 from hardwareversand.de and it was already binned.
the box was intact but the cpu in the plastick box was rotaded 90 degrees against clock,and had cooler signs.
well....what shoud i had to do....tested and it does 4.7@1.25 4.8@1.3 4.9@1.4 no go freezes
what a bunnyextractionty situation.
i'm building my phase change but can't get a good cpu......
i called them,and they sed to send it back,and next time i order they sed that will be brand new.yep,sure...hope so
-
turbon - on should be the true vid, i dont like my 4790k hiding behind 1.44v at 4.4ghz hahaha
it's the same vid on bios with/without turbo,just to read on giga mobos u need to disable turbo.
-
i will update OP soon guys!! just had a very busy week lol. and the results are so demotivating still nothing better than L418C221 / 223
also some vids are wrong, on MSI my vid is 1.078 in bios but on gigabyte it is 1.44 which is correct lol cause it was epic terrible cpu.
we should look at 4.4ghz vid. so boot windows and load the cpu and check what cpu-z says when its at 4.4ghz
u need to disable turbo on gigabyte mobos to see true vid on z97.
-
my 3rd 4790k is L420B831
does only 4.8@1.35 wprime 1024m on water...exact like my 2nd.
bios vid at stock 1.064, stock under load cpuz shows 1.216v.
big shit..
-
Jap...max on mine is 4900...1.33v
5000 even with 1.45v no chance...booting is fine with 5/5 at 1.24/1.375...but no 32m
i have too msi z97 xpower.where did u get bios 1.4b2?on the site there is only 1.3
those are beta bios.i'll wait till official
-
-
HV got high price for shipping internationally and less methods. Better choice is meinpaket.de - PP, cards, bank transfer + free shipping (to DE addresses). If you use a 'mail forwarding service' in DE (with DE address that forwards the packets to your country, IT) - then it's the best way and the cheapest. Direct order with direct international shipping from ANY DE/UK site cost sooooooo much money for the shipping.
Alright, will think about. The local store have a policy '15 days return in original box, unpacked, no question asked'.
Don't forget about this comparison site. Hope it helps and saves ALOT.
already know that site for comparison.12 euro still cheaper than 15 euro here in italy and they need 3/4 days before shipping.on german site bought my mobo at 4 pm and at 9pm my mobo already flying to italy,this thing is priceless.
-
Hello,
I saw your post and it seems I got the same batch number as yours. I haven't opened the box yet (brand new), still waiting to get CM N600 in the end of the week. Haven't purchased a CPU cooler yet (I'm going to buy Noctua NH-D15, the best one from this company; review #1 / review #2 / D15 club). Curious if I need to return the CPU to the store (it will take 30 days to receive the money, few hours ago have been delivered to me) and purchashing the same CPU from other store or to unpack it and use this one (with N600 and D15)?
It's not clear what was the first batch number, store name/country, temps/clocks and the 2nd batch number. The quoted posted above not clear if the results were for the 1st or for the 2nd.
Regards.
what can i tell you(my opinion if ur looking for 5ghz,but most 4790k do 4.8 without problems if interested) is to send back ur cpu,cuz L420B7xx are bad (most of them) i mean bad not reaching 5ghz,but you can be lucky and maybe is a 5 ghz but is a very small % that can be good.
yes,the results above are from my 2nd chip which is L420B765.1st chip was L331C518 and did 4.7@1.2v only, no more scaling.L means malaysia,3 means year which is 2013, 31 means week 31 from 2013.
all bought from the shop that a user posted above.
-
Germany
hardwareversand
lol
me too.waiting last one.
-
I only tried air with sub 1.3v!
I think on water it can do 5300 32m
but I'll better try it on ln2
where did u buy?
-
wowwwwwww.thats really nice,i think u got best 4790k reported.
a 1.0/1.01 will do for sure 5.2ghz++ on water.
very nice
btw how much did u push it on air or water ?
where did u buy t ?
tried one shop from germany and got 1 epic fail 4.7@1.2 and a 4.8@1.35v,waiting for the 3rd and last one,then i'm done.
-
what's vid on bios at full stock ?
lowest i saw is 1.04v.
a 5 ghz 4770k had 1.0/1.01v,with 4790k 5ghz is enought 1.04v.
wondering what a 4790k with a 1.0/1.01v vid can do.
-
Try a lower VCCIN and you might have more luck with that CPU.
tried everything,but no luck.
i need to wait some days,then i'll see if i have some luck with hasfaill
-
L410C ES excited to try, its brother scales nicely but 1.31vCore for 5ghz
what stock vid has on bios and stock on cpu-z ?
-
tomorrow i receive my second and last 4790k.i'm done with this haswell bunnyextraction
another bunnyextraction 4790k L420B765 stock vid 1.08v and turbo was only 4.2 ghz@1.13v, i enhanced turbo and goes 4.4ghz@1.2v
can do only this on water with Phobya G-Changer 360 V2 Radiator.
wprime 2.10 /c states disabled/ only vcore and /vccin 2.0v
4.5Ghz@1.19v 1024m temps max 61/61/63/58
4.6Ghz@1.19v 1024m temps max 62/61/64/59
4.7Ghz@1.23v 1024m temps max 67/67/69/64
4.8Ghz@1.28v 1024m temps max 70/72/75/66
4.9ghz@1.42v crashes around 30% with temps on 92 on highest core
-
my first extreme cooling oc,i will get another 4790k cuz it was funny,but this is a bunnyextraction 4770k
-
if i get a 4790k that does 5 ghz 1.25/1.3v and presumably it scales on cold what max frequency can i achieve around -40/-50ºC with a phase change that can deal around 400w?
Devils Canyon and Pentium K Batch numbers!
in Haswell (Z87/Z97) OC
Posted · Edited by knopflerbruce
*snip*