James7679

I'm sorry, what app? Sent from my SAMSUNG-SM-N920A using Tapatalk

@Massman You stated that James7679-US was already in use, if you'll check the registration emails used, you'll see that the two are the same. I registered a new name on accident when I logged in to the comp page. Could the two accounts be merged? Thanks for your help. Sent from my SAMSUNG-SM-N920A using Tapatalk

Multimeter at the PSU and digital gauge at the wall. I checked it under various loads and made an offset curve for Corsair Link and Hwinfo. Amazingly, they are pretty damn accurate. Sent from my SAMSUNG-SM-N920A using Tapatalk

Yeah, it's running in single rail mode. I managed to get Timespy and Nvidia Inspector to start working. Turns out Shadowplay breaks them for me. After I got Timespy working I bumped my GPU clocks +100 and full power consumption never went past 630w. That was with all fans screaming and my 5.1ghz cpu clocks. I know that if I were to run, say, Furmark and P95 at once, I MIGHT pull around 775 watts, might. AFAIK, there's no real world scenario that I would be subject to, that would force my CPU, RAM and GPU's to run full steam, in synchronicity. Sent from my SAMSUNG-SM-N920A using Tapatalk

Corsair RM850i. With my overclock on the CPU, RAM, and GPU's, and when SLI is working, consumption is less than 600watts. Sent from my SAMSUNG-SM-N920A using Tapatalk

It is a new one that already had it done. Sent from my SAMSUNG-SM-N920A using Tapatalk

Hi, hoping I can get some good tips on tweaking my setup to maximize SLI performance for both benchmarks and gaming. I do understand the current state of SLI, but obviously quite a few people have figured out how to manipulate some settings to have great in game and benchmark improvements. I have been researching some things I can do, but am unsuccessful. My setup is: AsRock z270 Taichi 7700k @5.1 w/4.7 cache 1.404 max vcore under AVX, AVX offset is 0 3600mhz 1.38 16, 18, 18, 36, 2t Samsung 950 EVO PRO 500gb EVGA FTW 2 1080 EVGA FTW 1080 Before I got the FTW 2, my FTW would do 2150/5800 no problem. Now, with both of them, I can barely manage +90/0. Firestrike score is 23292 Superposition 1080p extreme 8531 Timeapy won't complete Catzilla doesn't seem to use both cards Doom 2016, no increase BF1, no increase NVCP is set to max performance, Vsync off, power mode is prefer max perf W10 power plan is PCIe link state off, power savers all on, max CPU 100%, min CPU 0% My clock is 100% stable w/a fresh Conductonaut delid. GPU temps, are kinda high, #1 hits mid 70s, #2 never goes over 62. I haven't quite figures out how to build a power/fan curve in MSI AB. I know this is a lot, but I'm hoping someone who's walked this road can give me some solid info. Thank you. Sent from my SAMSUNG-SM-N920A using Tapatalk

See above, thank you again. Sent from my SAMSUNG-SM-N920A using Tapatalk

I just was able to test this. My baby doesn't like those settings. It boots into windows with no problem, except the mouse doesn't work.? Yeah, I dunno. Sent from my SAMSUNG-SM-N920A using Tapatalk

No, I just tested the settings real quick thus morning before I headed out the door for work. I'll check it tonight or tomorrow and let you know. Thanks again. Sent from my SAMSUNG-SM-N920A using Tapatalk

Thanks for the reply. I tried the settings you advised, no go. System won't post w/1t. Sent from my SAMSUNG-SM-N920A using Tapatalk

If anyone could lend me a little help with this, I'd appreciate it. Just using the sliders, at 130%, I can hit 2152/5622, with a max of 66 degrees. I can't push beyond this without a driver crash. Is there any point to try and push for more? If so, please, someone help me understand the custom curve. Sent from my SAMSUNG-SM-N920A using Tapatalk

Hi, been lurking around here a bit. I figured I'd try here and see if anyone could advise me. System: i7-7700k@50x w/45x cache, offset 160, LLC2; AVX load 86 degrees max w/1.38 vcore-no delid AsRock z270 Taichi Corsair Vengeance 3466mhz RGB 2X8GB PC4 27700, B-die, XMP enabled, 1.35volts, changed from 3466 to 3600, max load pulls 1.37 Corsair RM850i Evga 1080 FTW Samsung Evo Pro 950 500gb Corsair H105 I can't bring my LLC or Vcore any lower, without losing stability in OCCT. I can't lower the dram voltage without losing stability in OCCT. This particular overclock will be used for 24/7 for gaming, 4k raw video and hi res raw image processing, web, blah blah blah. I know I need to delid, but is there anything else I am missing, some magical setting that could get me more out of my my RAM? I am not a total newb when it comes to A CPU OC, albeit, not a pro. I don't really know what to do with RAM. All settings, except for those I mentioned are set to auto, for CPU, voltage and for RAM. Thanks in advance. Sent from my SAMSUNG-SM-N920A using Tapatalk

Please change my nickname to James7679-US. Thank you.