gradus

no need. I know pos good chips and test them.

dunno. some foto with sdram, about 10k modules, 1000+ at-h,at-k,at-6.

No, I talking about cas3. 220+ valid air. Cant test sdram WR modules bcz no mobo.

240 cas3 hard for mobo, ez for mem. I need find good 1:1 mobo. I have 220+ hynix AIR. And its mobo limited. Can easy 2-3-3 217mhz 1m, mobo limited too.

GIGIORACING I try LN2 mem, it dont like as i said. Ln2 on this mobo dont give boost too. Once time i did 1m on 219. How you can be mobo limited? you have 227 1:1 result. or you talking about max valid on sdram with cas3? my mobos bunnyextraction with 1:1. some 220+ valid. RUGGERO nonono, not 2225, only 332x) and 300 2.5-3-2.

Use you sherlock holms ability! He has foto with chips! and i buy all kingston 512sdram, with all pos chips

I have Infenion DDR1 close 320 air, imo different infenion may be better. so not only bh5 or tccd...need more testing.

I think gigio dont told correct info) I buy mem aftr spy his foto with kingston 512mb, same chips. I buy 10+ modules, only one go 210+. all others 195-205. all dont like Vmem, all hate cold. so his -60C on mem and other info dont correct imo.

I have same clocks on 3.3 and 4v

crashed on 17-19 loops 2 times. pot very big, maded by qrowz.

no backup, its maximum for my hardware now. we have 2 runs pos 56.2-56.3, but 1m crashed.

Impsy with my SL6BY

4:3 sub1m done too. http://hwbot.org/submission/2534638_gradus_superpi___1m_pentium_3_1.266ghz_s_59sec_5ms

1:1 I try 4:3 later. Have 30L of LN2.

RUGGERO I did 59 on 1266 with SS only, 3 days ago. For mem ask GIGIORACING, he know what chips I use. Same as he kingston. LUDEK111 nb - 1.95v, vMem - 3.85v. thx all! i think its not the end.

New WR CPU-Z socket370. Thx qrowz for assist, west-87 for LN2, dark welder for mobo mods.

holicho pentium3 wr from 2001 broken) bench 18-19.04.14 by ZOT. thx CROWZ for assist and WEST87 for LN2, PSYCHE for full modding mobo.

3 or 4? I think one is enough.) gigioracing when normal 1m s370 result?

Im intresting on this, send plz.

We need more people in s370 1m....target 50-55s post 1min result to hwbot plz.

ruggero benching s370 again?

I have E8600 6500-6600mhz. want to buy?

Im waiting many mem from ebay. Dont want bench now. And want try find Mtec from 1000+(he talking about 10000 ) 64mb moduls from local men.

1266)....and with golden 1400) I have cool 1266. 1900mhz air 1m, 2500+mhz cpu ln2. I try stabileze 250 fsb 1m with it.

4:3 not bad when 245+fsb