CATZILLA 1440 Shutdown the main board ....

[Guest Ximi]

Hello guys !!

 

I have a problem with CATZILLA 1440 runing , when run Physx the last run of Benchmark , shutdown the main board and its impossible finalice the Benchmark.

 

The Setup :

 

Asus Rampage Extreme IV

3930k at 4.5 Ghz , at 5 Ghz 5.2 Ghz run many times.

SLI GTX 780 Ti

G.Skill Ripjaws Z 2133 CL9

ENERMAX 1600 W

 

Thanks at advance !!!

[FireKillerGR]

Try different rails on PSU

[Guest Ximi]

Try different rails on PSU

 

Ok , Thanks friend !!!

 

What's the best PSU ?

 

I want to buy another one ....

[FireKillerGR]

this enermax should be enough, but if you use specific rails you may have issues like the one you got.

a) try to disable physx in nvidia drivers (set cpu)

b)use different 12v cables (8pin/6pin) in order to use different rails

 

Based on the specificationt table, your psu has 6 rails, use one rail for each connector per card (8pin will be on different rail than the 6pin).

Each card has 1x 8pin and 1x 6pin connectors, that way you will use 4 different rails out of 6. If its a rail problem, it should be fixed that way

[Oldscarface]

Before you buy another psu, Please check de LLC (load line calibration) in the bios.

If it is set to very high of extreme, Please lower it to high and test again.

I have heard that some mainboard has troubles when the LLC is set to very high or extreme.

[Guest Ximi]

Before you buy another psu, Please check de LLC (load line calibration) in the bios.

If it is set to very high of extreme, Please lower it to high and test again.

I have heard that some mainboard has troubles when the LLC is set to very high or extreme.

 

Thanks its works !!!

[Guest Ximi]

this enermax should be enough, but if you use specific rails you may have issues like the one you got.

a) try to disable physx in nvidia drivers (set cpu)

b)use different 12v cables (8pin/6pin) in order to use different rails

 

Based on the specificationt table, your psu has 6 rails, use one rail for each connector per card (8pin will be on different rail than the 6pin).

Each card has 1x 8pin and 1x 6pin connectors, that way you will use 4 different rails out of 6. If its a rail problem, it should be fixed that way

 

Thanks it works !!!

[Oldscarface]

What did you do Ximi?

Did you bought a new PSU or ?

[Guest Ximi]

What did you do Ximi?

Did you bought a new PSU or ?

 

Downcloks , less than 5 GHz , at least 4.5 Ghz on CPU and works well.