nachtfalke Posted May 3, 2014 Share Posted May 3, 2014 -60 load for a phase change unit is little bit out of range:D nice cpu:D Quote Link to comment Share on other sites More sharing options...
riska Posted May 3, 2014 Share Posted May 3, 2014 No it is not it is a 16800btu Rotary unit it has a Kprobe at the back of the evap at is says -58 and it have a k probe mounted in the site of the kopper thats on the cpu and it reads the temps i reported so no it is not out of range i have measured it with 3 different temp units and the probe is a Omega probe and there is only 1 degree differens with in the 3 temp units! in Cold rom temp like 6-10 c it is about 3-5c lower Quote Link to comment Share on other sites More sharing options...
nachtfalke Posted May 3, 2014 Author Share Posted May 3, 2014 not that BIG btu´s count mate..because the limit of refrigerant´s push with one 10-12k btu ....for example R507a have -47.1 boiled points , R404a -46,4 ..most phase change builders push the discharge pressure over safe limit to get that lower temps ..but in 1 year( or less) you have a death compressor. anyway nice score and nice cpu , again! cheers! Quote Link to comment Share on other sites More sharing options...
riska Posted May 3, 2014 Share Posted May 3, 2014 Thanks.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.