Random Posted December 25, 2014 Share Posted December 25, 2014 (edited) All sticks on hold, going to do some cold binning. Will add more as I have to go through a good chunk of sticks again on z97 PSC: Kit 1 & 2 are 1600mhz c6 pi don't remember how well they OC they werent anything special from what I recall 60$ each Not including shipping 100$ for 4 they are really good at their stock settings and even have a little wiggle room, i used them on my 4770k that doesn't OC worth a damn https://www.dropbox.com/s/egpxlrybhwe9jwl/20141225_031042.jpg?dl=0 #3 SOLD is c6 2000 Pi sticks, didn't mess with them much, they didn't match my really good c6 2000 kit so thats all I needed to know 175shipped in the US one stick passes32m i think 2750mhz, tight 2666 preset with 5 io both do tight 2666 settings on z97 asrock https://www.dropbox.com/s/vjorqw3u59zy5h9/2750%20sell%20kit.png?dl=0 guess they both boot into windows with c8 2750 but one causes fail in pi https://www.dropbox.com/s/kumezs4bgppctlr/20141225_024612.jpg?dl=0 https://www.dropbox.com/s/hp4da42znwhqoq5/c6200%20sellin%20kit.png?dl=0 2666 tight presets 4 is some psc I bought off ocn gamer, wasn't impressive g.skill trident 60$ https://www.dropbox.com/s/vm6vslndb0yd31x/20141225_153439.jpg?dl=0 5. Ripjaws 7-8-7 " tested some rips but couldn't find one that does 2600 at 1.945v tight TWCL but I gotlucky I found one. with cold maybe the ram can do 2700+ . " bought from djhenzjen 75$ https://www.dropbox.com/s/u1agi27vrv1285k/20150113_182838.jpg?dl=0 6. 6x2GB A-Data Gaming2.0 DDR3-2000 9-9-9-24 1,55-1,75v "Bought for tests, and I got exactly what I not searched for, highend KO8155 HJ PCB and obviously Elpida BDBG, which in spite of being well binned are not what I wanted as these are only fully useful on cold. One stick is defective, five others do specs at 1,5v and 1200 8-11-8 memtest below 1,75v on z77, on z87 I tested two random sticks for 2400 8-11-8-28 twcl6 at 1,75v 32M, 2600 boots and passes memtest also on Z77 with these sticks, All six sticks have same batch and identical partnumber/serialnumber and therefore are free to be combined. With highend PCB they might well be an excellent option on cold, no matter if they are bdbg or psc" 150USD https://www.dropbox.com/s/2fhsxs40gexwhaz/20150113_181557.jpg?dl=0 https://www.dropbox.com/s/vlj2y2734tz0nve/20150113_173012.jpg?dl=0 7. G.Skill 2x2GB DDR3-2000 cas9 ( F3 16000CL9D 4GBRM ) "My best PSC memory for low cas latency 6 and 7 , used only to play PCMark05 bench. Very good overclocking memory. Never took it sub-sero where this memory really shine. Price = $75US Dollar" one stick was weak in my testing, one did 2666 fine while the other would not even appear at such settings, maybe worked at 2600 most likely just at stock settings, sticks may have been dirty corner is slightly damaged at top of sticks https://www.dropbox.com/s/w2tt6xk8frbdwjg/20150113_184355.jpg?dl=0 https://www.dropbox.com/s/44rk4l6drjw3v5x/20150113_184606.jpg?dl=0 8. g.skill c7 2200 Pi 2x2gb https://www.dropbox.com/s/f8z22de0xttkmco/20150113_183116.jpg?dl=0 One stick passes 2666, one causes errors at those settings 150shipped 9 g.skill ripjaws c7 2200 I bought them like this and one of the stickers mysteriously vanished by the time i was taking pictures today. will try to locate. 125shipped https://www.dropbox.com/s/37dq40crz5wlsbm/20150113_183221.jpg?dl=0 https://www.dropbox.com/s/8qzys45yffi66o5/20150113_183317.jpg?dl=0 10. g.skill ripjaws c7 2133 https://www.dropbox.com/s/cyousgz11i3gb39/20150113_183425.jpg?dl=0 125$shipped 11 g.skill ripjaws c7 2200 PCB has a damaged corner but runs fine, I was assured by gunslinger whom I purchased it from that g.skill would RMA them if I wanted https://www.dropbox.com/s/n5aj456v9ly2vbi/20150113_183658.jpg?dl=0 https://www.dropbox.com/s/tve50yupfupfg7v/20150113_183638.jpg?dl=0 125$ shipped 12. PENDING g.skill pi 2200 c7 pcb ko-8117 https://www.dropbox.com/s/2lrrbfc8dimdx4h/20150114_023645.jpg?dl=0 2666 supertight https://www.dropbox.com/s/twihw6gqc544kz2/2666%202200%202600%20preset.png?dl=0 both sticks posted 2750 but failed to load windows 1.92 so lower voltage than average 150 usd Disclaimers; All items with descriptions in quotes are copy pasted and edited from the threads i bought them. Intl. Shipping available but discouraged due to price and just I don't feel comfortable with the packing options available, I couldn't guarantee their safe arrival. also due to current euro values all usd quotes are equall to euro quotes, so 150usd is 150euros, the difference if any will cover the added shipping costs though depending on logistics intl. Shipping may req. additional fees Also I package items as much as I can. this includes but is not limited to bubblewrap, antistatic foam, and packing peanuts. paypal preferred tests available upon request, I have 4930k 4790k and 3930k chips with great IMCs I just have misplaced most of the runs I have done with these kits, I mostly used them on my 3930k and since have upgraded a few times no voltage testing was done on my end, my chip seems to be power hungry based on the info I received at the sticks' time of purchase For example: My best kit is supposed to do 2666 tight at well under 1.9v but I have never had a successful bout without being over 1.92v Edited January 15, 2015 by Random 1 Link to comment Share on other sites More sharing options...
ObscureParadox_3XS Posted December 25, 2014 Share Posted December 25, 2014 I'm not 100% certain, but I think the tridents might be BBSE. Might be worth a check just in case. Link to comment Share on other sites More sharing options...
Random Posted December 26, 2014 Author Share Posted December 26, 2014 Nah same 1040 sn as the rest of my psc I only have 2 bbse kits and its not going to be for sale for a bit, have to try them out with z97 Link to comment Share on other sites More sharing options...
Random Posted December 30, 2014 Author Share Posted December 30, 2014 bump adding pics of testing with c6 2000 pi kit Link to comment Share on other sites More sharing options...
Random Posted January 3, 2015 Author Share Posted January 3, 2015 Price drop on the c6 2000 kit 1 Link to comment Share on other sites More sharing options...
Random Posted January 14, 2015 Author Share Posted January 14, 2015 (edited) More sticks added. Will upload pics once i can get on pc testing available upon request otherwise it will slowly trickle in Edited January 14, 2015 by Random Link to comment Share on other sites More sharing options...
Recommended Posts