Jump to content
HWBOT Community Forums

(FS)Top GSkill PSC -Pi2000C6/Tridents


Recommended Posts

  • Administrators


Up for sale are my last bench PSC, since I bailed out of benching I decided to make a clear cut now and sell them




1. 3x2GB G.Skill DDR3-2000 CL6-9-6-24 PID


8117 PCB, easy 2667 tight and more, I received these as backup in case I would decide to bench again when I sold my 2400C9PIS and my 2133C8 RipjawX. Never used them for real benchmarks, but they did 2400 C7 below 1,65v on Z77 and on Z97 2667 C8 tightworked easily on Asus Impact and Asrock OCF when I tested them.

jd801429tvoqy.jpg jd8014206lubh.jpg


2. 3x2GB G.Skill Trident DDR3-2000 CL9-9-9-24 1,6v


These were my test and bench kit for quite a while, all sticks easily do 2667 tight and more, for benchmarks I ran best two sticks above 2700 tight with less than 1,9v, headroom left. In the past I combined this kit with a Flare stick I had which gave two dual kits that did 2730 and 2700+, I guess this shows how good this kit is, I had lots of tridents but these are strongest in the end. In original blister package


jd801423o4j2f.jpg jd801427mfkp2.jpg


Prices (shipping not included)

1. 175 Euros sold

2. 140 Euros sold


The mems are located in germany, shipping will be with deutsche Post and will be around 12 Euros per kit including tracking and insurance. Payment is possible with paypal or western union. Please do not offer trades for ddr4 like happened at my last thread, it is more than uncertain I will ever test skylake so I would rather keep my psc than trade them for crap that needs cas15


Disclaimer: Private sale, no returns, also no warranty provided by me. On oc, ymmv, but these are very strong mems and they will get the job done, especially because I tested them on air and IMC on air as well, no voodoo

Edited by websmile
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...