Guest harrynowl Posted May 24, 2016 Posted May 24, 2016 (edited) For sale is my 580 matrix platinum, decent clocker on both core and memory. I believe it does around 960MHz-980MHz on air with the default cooling and 1.212. Decent memory could run 1300MHz in Firestrike and 1275 in 3DM11 on the tightened profile available in GPU tweak. I believe I flashed it to a coldslow bios. Tested on cold before (rotary single stage, -45c or so load -59c idle). Running around 1.35V for these benchmarks: http://hwbot.org/image/1611983.jpg http://hwbot.org/image/1612164.jpg Was insulated, have since cleaned off but some signs will remain. Not like it's in warranty at this point anyway. Sold Card comes boxed although the box is a bit tatty, accessories are as pictured (2 molex -> pcie, 1x cd and a manual) and the card is in good condition although there is a small mark on the backplate at the edge where the paint got scraped. Edited June 13, 2016 by harrynowl
Samsarulz Posted May 29, 2016 Posted May 29, 2016 what was best or better results with Air/Water? Do you think is capable of 1100 custom water? Any special BIOS or SW mod to voltage to go up?
Guest harrynowl Posted May 29, 2016 Posted May 29, 2016 what was best or better results with Air/Water? Do you think is capable of 1100 custom water? Any special BIOS or SW mod to voltage to go up? I had 1050MHz running on water. I don't remember volts sorry. You can use GPU tweak (there's a matrix tools pack on this forum somewhere) to get high volts on this card, inc memory, pll and core.
Recommended Posts