Jump to content
HWBOT Community Forums

(WW)3733/4133 B-die kits (G.Skill/Zadak511)


Recommended Posts

  • Administrators

Good morning,

up for sale are three Samsung B-die based memory kits in excellent condition and waza capable, for details please read the item descriptions





1. 2x8GB G.Skill TridentZ DDR4-3733 Cl17-17-17-37 1,35v


SN 1650A500xxxx69/70, retail in box with sticker. Tested for 4000 12-11-11-28 1T 220 on MOCF at 1,86v BIOS (~1,92v real) with waza and 4133 12-11-11-28 1T 1,96v BIOS Pifast, 32m waza 4133 failed after around 10 loops. Tests on Impact8 gave 4k 12-11 at 1,92v real as well. The kit is not that fond of my Impact though and opted out (for whatever reason) at 4120 at Geekbench at 2,03v despite booting 2v 4133 and voltage headroom up to around 2.06v. All tests with imc and memory air cooled. Warranty should be intact, labels are flawless, heatspreaders were never removed.


20170305_141841u5zt7.jpg16506970spi32m6rjm2.jpg 16506970pi4133rzjjk.jpg


2. 2x8GB G.Skill TridentZ DDR4-3733 Cl17-17-17-37 1,35v


SN 1650A500xxx83/84, retail in box with sticker. Tested on MOCF for 4000 12-11-11-28 1T 220 waza 1,85v BIOS (around 1,9-1,91v real). I moved on then to flash and test my Impact8, might have been not best idea. The kit did 4k c12 waza 1,9v and 4133 12-11-11-28 220 1T geekbench, Pifast and XTU at 2,01-2,03v but failed 4133 waza two times at loop 2 and loop 12. Warranty should be intact because labels are flawless and heatspreaders were not removed


20170305_141836ujx18.jpg 16508384pi41330vyae.jpg 16508384spi32mgbbc8.jpg

3. 2x8GB Zadak511 DDR4-4133 C18-20-20-48 1,40v


Sample, I did a review on these which I link here, for further and detailed information please check results and content, these are hard to handle at 4000c12+. I was able to run 3866 and 4000 12-11-11-28 1T 220 waza at 1,84 respectively 1,96v real on mocf and also reached very nice daily memtest clocks with these. I don´t think these have warranty.




Prices including shipping with deutsche Post worldwide


1. 210 Euros sold

2. 220 Euros sold

3. 160 Euros sold


Payment is possible with paypal (gift or buyer covers fees) or western union. If you want different transporter please contact me for a quote.


A personal statement, it should be clear that results depend on test system used and compability as well as settings. The 3733s for example do not boot XMP on MOCF because the board sets a non bootable twcl value, if I change this by hand they pass memtest way below rated voltage, which they do out of the box on Impact anyway. OC needs capable hardware like imcs and boards and correct settings, if you think oc is only xmp or load predefined profile you are at wrong thread here :) - no returns, and no warranty by me

Edited by websmile
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...