CUV4X-DLS motherboard. I have two pentium 3's running on it, but cpu-z won't show the dropdown for both processors.

 

Do I need this available to make submissions when claiming two processors?

No, We are going to see according to the score that there is 2 processors,

I was having the same problem on a workstation, CPU-Z was showing only 1 cpu, but after installing xp again, it shows 2 cpu(because the first time I installed XP with only one cpu).

Just write down on the comment tab that there is 2 cpu, and do not forget to set 2x socket

 

You can display the device manager too on the screenshot it's fine

Yeah, I just tried wprime and it's only showing up one cpu as well. Orthos is the same. Only stresses cpu0

 

Both show up in device manager though, so I don't know what I've done wrong. I installed xp with both processors

ugh. I can't set the affinity in task manager either.

Then most likely you'll only be able to use one CPU when you bench:p

crap, is there a BIOS setting ?

try to look into the "device manager" under "computer".

for 2 or more cpus\cores there should be "acpi multiprocessor pc".

XP home edition. /facepalm Mystery solved.