John_Hexane - 945PLCAP @ 240.2MHz - 240.19 MHz Reference Frequency

[John_Hexane]

E6550 despite the BSEL Mod on the same 800 MHz-did not work, the board stopped at POST-code 04.

[ludek]

I maybe will help you. Read my descriptions:

https://hwbot.org/submission/4696627_ludek_reference_frequency_p5gc_mxgbl_429.55_mhz

https://hwbot.org/submission/3680997_ludek_reference_frequency_conroe1333_d667_r1.0_424_mhz

 

long story short: try to make shure if FSB:PCIe ratio is always 3 +/-5% and maybe it will make your score higher.

\ my motherboards are 945GC, but it may be applicable to yours as well.

Edited May 19, 2021 by ludek

[Antinomy]

18 hours ago, ludek said:

try to make shure if FSB:PCIe ratio is always 3 +/-5%

Yeah, keeping PCI-E sync to FSB really helps for those 9x5 chipsets.

[John_Hexane]

Quote

4 hours ago, Antinomy SAYS: Yeah, keeping PCI-E sync to FSB really helps for those 9x5 chipsets.

On this board, an attempt to fix the PCI-E frequency results in a hang on POST code 04. So I just left it on "Auto". In this mode, after ~265MHz, perhaps a little later, problems with the video card begin, but as you can see, this did not particularly bother me)

Edited May 20, 2021 by John_Hexane