SteveRo Posted April 14, 2011 Posted April 14, 2011 In my last picture attached - I am relying on conformal coating only, should I put some armaflex over the back of the card? What about the pcie slot? Quote
Linuxfan Posted April 14, 2011 Author Posted April 14, 2011 Definitely need to cover the PCIe slot so you don't get moisture in there. Also make sure the board doesn't hold water so cover with eraser or towel or something. Quote
MTP04 Posted April 14, 2011 Posted April 14, 2011 Good first dice run. Next time break up the dice into smaller pieces, that way the dice will make better contact with the pot. Quote
SteveRo Posted April 14, 2011 Posted April 14, 2011 What is best for the pcie slot - eraser all around where the card inserts? Seems like it would be hard to pack the eraser under the pot where the card meets the slot? Quote
MTP04 Posted April 16, 2011 Posted April 16, 2011 Definitely surround the pcie slot with armaflex or eraser and make sure you have vaseline on the card contact pins and pcie slot but don't pack it in. Then just use paper towel under the pot when you plug the card in. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.