Christian Ney Posted September 26, 2011 Author Share Posted September 26, 2011 (edited) Ok, I did the mods (lol, so much things are soldered on the graphics card now). Alienware M17X / GTX 260M 2 Phase for GPU: Voltage Reading Points: 1 phase for memory: Voltage Reading points: Memory Volt Mod (Working & Tested): Voltage Regulator: ISL6269 From FB(pin6) to GND, R=1164 Ω Solder a 20K VR from FB to GND. Stock Voltage Measured: idle: 1.57v Load: 1.863v After mod @ 20K (R(FB to GND is now 1100 Ω)): idle: 1.66v Load: 1.97v GPU Volt Mod (Doesn't work, tried FB, FB2 and rbias) Voltage Regulator: ISL9502 R from FB to GND = 79000 Ω I used a 1M VR, Req (Ω) = 73000 Ω Stock Voltage Measured: idle: 0.907v Load: 1.015v After Mod @ 1M Ω: idle: 0.907v (should be 0.99v) Load: 1.015v (Should be 1.09v) So my memory Mod is working, but not the GPU mod, I guess, it's vsellocked Maybe I will vsel mod it, maybe.... or not. Edited September 30, 2011 by Christian Ney Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted September 30, 2011 Author Share Posted September 30, 2011 Modded: Setup: Cooling: GPU Temp: Memory Voltage: GPU Voltage: Quote Link to comment Share on other sites More sharing options...
Crew stummerwinter Posted October 1, 2011 Crew Share Posted October 1, 2011 You're damn crazy...:nice: Quote Link to comment Share on other sites More sharing options...
rbuass Posted October 3, 2011 Share Posted October 3, 2011 Looks amazing... I never tryed overclock NB Feel like something is missing in my overclocking life...lol Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted October 4, 2011 Author Share Posted October 4, 2011 [hwbot=2211850]submission[/hwbot] & [hwbot=2211851]submission[/hwbot] It's not easy to compete with a C2Q against Core i7 Quote Link to comment Share on other sites More sharing options...
Crew Turrican Posted October 5, 2011 Crew Share Posted October 5, 2011 nice:D Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted October 7, 2011 Author Share Posted October 7, 2011 (edited) Soooo, as nor FB/FB2/rbias(vref) Mods are working and as I don't want to try vselmod, I edited the bios to raise voltage, I flashed the card with a 1.1v bios and a 1.2v bios, voltage raised only from 1.009 to 1.06v... not worth a new series of tests Edited October 7, 2011 by Christian Ney Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.