71proste Posted April 14, 2008 Posted April 14, 2008 and again,please do something... same score,screen same and two different members-cheaters or mistake? http://www.hwbot.org/result.do?resultId=723580 http://www.hwbot.org/result.do?resultId=723636 demiurg please do something with results reported-previous page,thanks
manos_ir Posted April 15, 2008 Posted April 15, 2008 http://www.hwbot.org/result.do?resultId=639164 http://www.hwbot.org/result.do?resultId=638790 http://www.hwbot.org/result.do?resultId=640642 no proff at all http://www.hwbot.org/result.do?resultId=720784 http://www.hwbot.org/result.do?resultId=707999 http://www.hwbot.org/result.do?resultId=708732 http://www.hwbot.org/result.do?resultId=720783 http://www.hwbot.org/result.do?resultId=720782 new result without gpu-z http://www.hwbot.org/result.do?resultId=677689 http://www.hwbot.org/result.do?resultId=677579 no resolution appear http://www.hwbot.org/result.do?resultId=638071 in this one... i think that it is a different card (flashed bios) because it works with 450mhz at memory..... it is to far away from real...even the first score run on 380..... it's impossible ddr with stock frequency 250 to reach 450.... it could be a different card with ddr2 mems
demiurg Posted April 15, 2008 Posted April 15, 2008 http://www.hwbot.org/result.do?resultId=714698http://www.hwbot.org/result.do?resultId=714704 http://www.hwbot.org/result.do?resultId=714713 http://www.hwbot.org/result.do?resultId=714746 http://www.hwbot.org/result.do?resultId=714691 still not moved to GF 6200 TC512 GF6200 not a 6200LE,results uploaded by the same guy http://www.hwbot.org/result.do?resultId=698622 http://www.hwbot.org/result.do?resultId=698626 http://www.hwbot.org/result.do?resultId=698624 http://www.hwbot.org/result.do?resultId=698617 http://www.hwbot.org/result.do?resultId=698620 http://www.hwbot.org/result.do?resultId=698621 http://www.hwbot.org/result.do?resultId=699288 fixed
demiurg Posted April 15, 2008 Posted April 15, 2008 wrong category, this is no S479 Yonah CPU http://www.hwbot.org/result.do?resultId=722712 http://www.hwbot.org/result.do?resultId=722654 http://www.hwbot.org/result.do?resultId=722666 http://www.hwbot.org/result.do?resultId=722706 http://www.hwbot.org/result.do?resultId=722658 pleace fix this fixed
demiurg Posted April 15, 2008 Posted April 15, 2008 I see Sweet is taking care of the invalid/wrong version of Wprime results. You might as well add these to the list. http://www.hwbot.org/compare.do?resultId=689912 1.58 http://www.hwbot.org/compare.do?resultId=690707 1.58 Both are wrong version. :nana: fixed
demiurg Posted April 15, 2008 Posted April 15, 2008 I'm sorry but all version that i wrote are old version , so they are not valid, I found many submit whit 1.58 version , but I don't post, because I think they are validates.Thank you for revise my bench's, I hope you have enjoyed,..... some are not good, but i hope improve;) In this discussion both lose something, no? And pointhore , you have many Invalidates WPrime, see this my friend: http://www.hwbot.org/result.do?resultId=636538 http://www.hwbot.org/result.do?resultId=616055 http://www.hwbot.org/result.do?resultId=612977 http://www.hwbot.org/result.do?resultId=612352 http://www.hwbot.org/result.do?resultId=603271 Regards, and sweet dreams fixed
pointhore Posted April 16, 2008 Posted April 16, 2008 fixed At one time the following were able to be verfied on the Wprime website. http://www.hwbot.org/compare.do?resultId=616055 http://www.hwbot.org/compare.do?resultId=612977 http://www.hwbot.org/compare.do?resultId=612352 http://www.hwbot.org/compare.do?resultId=603271 The software available to us had some bugs in it at that time giving the Invalid checksum response. Of course we can't check them now since the Wprime database can no longer be accessed. You can block these if you want, it's up to you. P.S. Some of these were already blocked and then reinstated by Massman.
demiurg Posted April 16, 2008 Posted April 16, 2008 I pay your attention that now the results older 6 month cannot be moderated.
S_A_V Posted April 16, 2008 Posted April 16, 2008 since the Wprime database can no longer be accessed Verification link format was changed but wPrime database works fine! Old wprime verification link format: http://www.wprime.net/cgi-bin/score.exe?id=<result_number> New wprime verification link format: http://www.wprime.net/score.cgi?id=<result_number> Even if you can't convert link from old to new format manually, you can use search feature at wprime site - http://www.wprime.net/search.html?r=searchscore
DopeLex Posted April 16, 2008 Posted April 16, 2008 Wrong resolution: 1280x800 instead of 1280x1024. http://www.hwbot.org/compare.do?resultId=723700
mAlkAv!An Posted April 16, 2008 Posted April 16, 2008 2983 points instead of 2083(screen). Besides wrong gxcard in description. http://www.hwbot.org/result.do?resultId=717479
71proste Posted April 17, 2008 Posted April 17, 2008 http://www.hwbot.org/result.do?resultId=716467 http://www.hwbot.org/result.do?resultId=717048 wprime 1.54 after 2008
dread77 Posted April 17, 2008 Posted April 17, 2008 Hi there, what is the problem with below results???? http://www.hwbot.org/listResults.do?userId=13285&applicationId=1 http://www.hwbot.org/listResults.do?userId=13285&applicationId=2 Bot marked them with "Insufficient Verification for Rankins", but it was uploaded as I always do, same procedure. Please, can someone explain me the problem??? Should I verify them through futuremark??? This is very frustrating!!!
dread77 Posted April 17, 2008 Posted April 17, 2008 Thank you for your prompt reply. I guess I have to run them again.
mAlkAv!An Posted April 17, 2008 Posted April 17, 2008 http://www.hwbot.org/result.do?resultId=724538 screen does not show any verification or specs.
dread77 Posted April 17, 2008 Posted April 17, 2008 see it as an opportunity to set higher scores:) You bet I did!!!
jabski Posted April 17, 2008 Posted April 17, 2008 wrong cpu P4 D960 not 3.73EE http://www.hwbot.org/result.do?resultId=581816
mAlkAv!An Posted April 18, 2008 Posted April 18, 2008 http://www.hwbot.org/result.do?resultId=724778 All specs left or hidden. At least gpu-z for detcting it as an AGP card and the whole 3DMark06 window would be nice. http://www.hwbot.org/result.do?resultId=718770 + http://www.hwbot.org/result.do?resultId=718957 looks like hardwaresharing. same specs/clocks and same desctop. Besides no proof of AGP version. http://www.hwbot.org/result.do?resultId=718797 http://www.hwbot.org/result.do?resultId=718801 No GPU information available. http://www.hwbot.org/result.do?resultId=718875 X800Pro instaed of X800GTO(AGP).
manos_ir Posted April 18, 2008 Posted April 18, 2008 which clever mod delete my score ? http://www.hwbot.org/result.do?resultId=713142 with the excuse of not enough proffs ......... THERE IS VERIFICATION LINK THAT LEADS TO ORB........ and why this scores disapears from my profile...? it's suppose that i can see my blocked scores ....in the link in the bottom of my scores..... but it's not there....... and why i didn't get an answer about this one : http://www.hwbot.org/result.do?resultId=638071 in this one... i think that it is a different card (flashed bios) because it works with 450mhz at memory..... it is to far away from real...even the first score run on 380..... it's impossible ddr with stock frequency 250 to reach 450.... it could be a different card with ddr2 mems ???????????????????????????
mAlkAv!An Posted April 18, 2008 Posted April 18, 2008 which clever mod delete my score ? http://www.hwbot.org/result.do?resultId=713142 with the excuse of not enough proffs ......... THERE IS VERIFICATION LINK THAT LEADS TO ORB........ and why this scores disapears from my profile...? it's suppose that i can see my blocked scores ....in the link in the bottom of my scores..... but it's not there....... Well i would say you didn't run 3DMark06 with default resolution of 1280x1024 but 1280x800. In my eyes this is the only reason to block it, because the ORB is really present and why i didn't get an answer about this one : http://www.hwbot.org/result.do?resultId=638071 in this one... i think that it is a different card (flashed bios) because it works with 450mhz at memory..... it is to far away from real...even the first score run on 380..... it's impossible ddr with stock frequency 250 to reach 450.... it could be a different card with ddr2 mems ??????????????????????????? What about this: it's DDR-450 with 225Mhz. Thats what DDR means, double data rate ^^ U can change ATT options for either showing the real clock or the DDR(double) one.
manos_ir Posted April 18, 2008 Posted April 18, 2008 What about this: it's DDR-450 with 225Mhz. Thats what DDR means, double data rate ^^ U can change ATT options for either showing the real clock or the DDR(double) one. my falt...you're right !
Bwanasoft Posted April 18, 2008 Posted April 18, 2008 which clever mod delete my score ? http://www.hwbot.org/result.do?resultId=713142 with the excuse of not enough proffs ......... THERE IS VERIFICATION LINK THAT LEADS TO ORB........ Resolution 1280x800 for right scores we need 1280x1024 use external Monitor and run the Bench again.
mAlkAv!An Posted April 18, 2008 Posted April 18, 2008 good catch Bwana! My words (about the reso) ^^ Can you also please have a look at the other results i pointed out? (first one has been already fixed by yourself) http://www.hwbot.org/forum/showpost.php?p=18830&postcount=1745
Recommended Posts