yeah, i also added the "post" screen.

Yes, it's informative because a very simple reason - the 486 especially Intel's did have the CPUID feature but they showed the registers values only on reset - that's why BIOS can figure out the CPU but software is not so precise.

Very smart decision.

 

I hope the popularity of this family will increase.

 

P.S. can you tell, whether CPU-Z is able to recognize any of your 486? I see you have ones from Intel, AMD and Cyrix. If yes, a picture of CPU-Z would be nice

Edited July 11, 201014 yr by Antinomy

Yes, it's informative because a very simple reason - the 486 especially Intel's did have the CPUID feature but they showed the registers values only on reset - that's why BIOS can figure out the CPU but software is not so precise.

Very smart decision.

 

I hope the popularity of this family will increase.

 

P.S. can you tell, whether CPU-Z is able to recognize any of your 486? I see you have ones from Intel, AMD and Cyrix. If yes, a picture of CPU-Z would be nice

 

 

CPU-Z recognition of the original Pentium CPU (the 800nm, 5V CPU) needs to be improved;

It shows up as a 500nm CPU and there is no indication of which frequency the CPU was made for whereas /proc/cpuinfo in Linux shows the correct value.

I don't see any problems in your submission. You mean it doesn't show the default frequency? Well, Linux isn't able too - it can make you think it does

Take a socket 7, change the multi and Linux will get confused too.

 

P.S. can you tell, whether CPU-Z is able to recognize any of your 486? I see you have ones from Intel, AMD and Cyrix. If yes, a picture of CPU-Z would be nice

 

till now i was never able to get cpu-z running in win 95/win nt 4.0

the newer cpu-z version doesn't seem to support older OSes than win 98.

i hope i can find a cpu-z version which runs on those old OSes.

 

officially cpu-z only supports cpus from the pentium 1 onwards.

Officially - yes. But sometimes you just have to ask and say "please"

I don't see any problems in your submission. You mean it doesn't show the default frequency? Well, Linux isn't able too - it can make you think it does

Take a socket 7, change the multi and Linux will get confused too.

 

Yes, in Linux the stock frequency (60MHz) as well as the current (overclocked: 66Mhz) frequency was shown, I was a little surprised when I first saw that.And since you seemed to be looking for input on how CPU-Z behaved on older hardware I figured I mention it.

You mean that Linux performs some kind of trick to figure out that OCed my CPU? ;-)

 

One more thing: Yesterday evening I uploaded that text-output you wanted: I only edited my last message on the competion-thread so I didn't show up as new message, so you might have missed it.

http://hwbot.org/forum/showpost.php?p=63451&postcount=51

No, I've seen it, thank you

Would somebody please give me some feedback on this screenshot I made:

http://hwbot.org/signature.img?iid=425287&thumb=false&iehack=.jpg

(It is for a SuperPi run on an 486DX2-66 @80MHz)

Is it alright? Should I use some other indentification utility for the CPU?

Good enough for me. Though, I would move the two windows on the right a bit to the left (but so that they don't close the "Calculation complete window").

Thanks for the input.

You are right about the window placement. I am going to try to improve my result little a bit too :-)

i don't think this will be possible without modifing super pi.exe itself which is not allowed of course.

 

the "original" super pi (without the decimal digits) can be used, but you always have to enter your result with xx.999 seconds.

so if you get, for example, 25 seconds on a run with the orignal super pi you have to enter 25.999 when submitting the result, because you can't tell if your result is 25 seconds flat or 25.999.

 

So is this still the case? Ive been trying different versions of superpi_mod and they all crash in one form or another. If I submit the time as .999 with screenshots of cpu verification then the time will still be accepted for rankings?

Pik4chu;73122']So is this still the case? Ive been trying different versions of superpi_mod and they all crash in one form or another. If I submit the time as .999 with screenshots of cpu verification then the time will still be accepted for rankings?

 

yes, i think so.

It won't crush if it's run on Win NT

It won't crush if it's run on Win NT

 

Problem is its an old laptop that cant boot from CD and the only floppy drive I had for it is *somewhere* if I even still have it at all or I would have installed linux on it already

Just bumping this old thread so it's a bit easier for me to find when I need it soon-ish. Mods, please accept my sincere apologies for the willful forum abuse.