-
Posts
12879 -
Joined
-
Last visited
-
Days Won
636
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Leeghoofd
-
-
-
Videoproof is requested for all 7-ZIP scores surpassing 49810 points
Take note that we finalise the ranking maximum 2 days after competition closure, thus if the videoproof is not provided and approved in that timeframe by the G.Skill referees your score will not be taken into account.
Tweak(s) must be clearly visible or explained in detail. None of this information will be shared with other competitorsYou can wetransfer it to albrecht@hwbot.org
-
You can manually edit the submission after submitting. The edit button is on the right
-
Very nice, great score
-
-
just try an older version of CPUZ, they also have a vintage one at the site
-
Plz pay attention to what you sub plz, even 0.001Mhz over the 6005Mhz threshold in any of the monitoring programs will be removed
Secondly sample screenshots were added from the start of the compo with what needs to be visible, ensure it is!
- 3
-
as long as it shows CPU clocks and the full Memory timing on the Memory Tab you should be good
- 1
-
6005.14 and very low sensor measurements, do not tinker with the software, average is 10-12 not 6
- 1
-
-
Aim for Bronze!!!
-
XTU indeed no longer supports them old CPUs. HWBOT has been adapted to Intel's new datafile format.... so no go...
- 1
-
-
-
Always add CPUZ tabs for CPU and memory to each 2D screenshot, even when using BenchMate.
For 3D also a GPUZ is required. Check out the rules at: https://hwbot.org/benchmarkRules
-
Always add CPUZ tabs for CPU and memory to each 2D screenshot, even when using BenchMate.
Check out the rules at: https://hwbot.org/benchmarkRules
-
Always add CPUZ tabs for CPU and memory to each 2D screenshot, even when using BenchMate.
Check out the rules at: https://hwbot.org/benchmarkRules
-
Plz always add 2 x CPUZ tabs , one for CPU and one for memory to each submission ( even with BenchMate).
Check out the rules and sample screenshot at: https://hwbot.org/benchmarkRules
-
Plz always add 2 x CPUZ tabs , one for CPU and one for memory to each submission ( even with BenchMate).
Check out the rules and sample screenshot at: https://hwbot.org/benchmarkRules
-
Plz always add 2 x CPUZ tabs , one for CPU and one for memory to each submission ( even with BenchMate).
Check out the rules and sample screenshot at: https://hwbot.org/benchmarkRules
-
Stroooong Clemens
-
removed
- 1
-
no XOC mode Nik
-
SOFTWARE Windows 10 only (no server OS)
CPU-Z 2.09 or newer
BenchMate 11.3 only
Verification screenshots include CPUZ tabs for CPU, MB, Memory and SPD tab per memory module
NDI_GELATO - DDR5 SDRAM @ 4302.1MHz - 4302 MHz Memory Frequency
in Result Discussions
Posted