.jpg.5e77ceb7feaf82797ecbe324cbc12b3b.jpg)
1whiteshark1
-
Posts
89 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Blogs
Posts posted by 1whiteshark1
-
-
The Galax Epower still avaible?
-
Update:
After talking with Tin and doing some more testing, it was indeed the new driver causing the coldbug.The "NOT GOOD" message is cause by the tmp411 reaching its minimum temperature and just a coincidence that it happens at the same temp.
What i still dont understand is why the behaviour of the coldbug is so different from 970/980 non ti. Looking at the ranking it looks like its not just my card .
-
Yeah the driver issue was considered, but on all other maxwell cards i have:
- the crash is different
- the temperature has some range and is not exact
- there is a tweak which lowers the temperature where it happens and that made 0 difference on this card
Not to mention the "NOT GOOD" would have been programmed before cuda 10 came out.
If noone has an idea i will retest with old driver but i think its unlikely.
-
Maybe someone ran into this before or knows whats going on.
I have a 980ti KPE, where the instant the GPU Temperature hits -64C the Driver crashes. What i find interesting is that at that temp the monitoring also starts saying " NOT GOOD".
I have tried this with the with the stock oc bios, the stock ln2 bios and the XOC bios, all same result. I found nothing in the public guide about this.
Appreciate any help!
-
Is the new 3dmark update mandatory?
-
31 minutes ago, unityofsaints said:
Your bad is still better than my good card lol
thats not your best card, right? i thought you just picked one at random...
-
thats how its done! nice score
-
1
-
-
What, thats crazy
-
4 hours ago, Gigelz said:
Nice to see my little selfmade gpu pot rocking
good work !
Its fast like a rocket
2 hours ago, unityofsaints said:Nice! How did you handle the coldslow issues?
by benching around -60 because displaydrive acting up
might mod and try again
-
2
-
-
On 11/14/2020 at 5:30 PM, Splave said:
Check effective frequency in hwmonitor when the performance becomes bad
Indeed its always 51xxMHz no matter what frequency is set.
Happens everytime i go below -140
-
Will do, if it is lower how do i combat that?
-
12 hours ago, Lucky_n00b said:
@Splave Question - did you encounter weird performance 'drop' (like 500-1000 point drop) when your cpu is near the limit?
Same behavior here, also using the b550 tomahwak. Maybe it is board/bios related?
-
1
-
-
formatting appears to be broken
-
1
-
-
7 hours ago, shar00750 said:
Driver cb at -60 but i can pass it
Wait, there is a way to get rid of the cb?
-
4 minutes ago, yosarianilives said:
We gonna see another dual gpu stage? sli/xfire would be fun, either 2gpu one card (fun but $$$ fast) or just 2x cards would be interesting.
If yes please pick the benchmark/Hardware-restrictions to make it sure ist GPU focused
-
-
many options left indeed, just a quick test with last liters
-
To clarify, since it doesn't say The FM link has to be valid we can use LOD, correct?
-
-
strong efficiency, will try to take back soon ;)
-
6 hours ago, MaddMutt said:
Can you disable cores for the DDR4 catagory??? If not you are stuck running only Dual Card configs - GTX-295/590/690/Ect.Ect. No 4-way 480/580/680/780/980/Ect.Ect
1 hour ago, yosarianilives said:M9A should do 4 way
M9A will not do 4way with 4 discrete NV GPUs, but there are boards that can: Gigabyte Z170 SOC Force, EVGA Z170 Classsified and Asus WS.
-
1
-
-
To add to what Jason said, be aware that the pinout can change between different models.
-
1
-
-
-
Thanks, its a tool i wrote to overclock nvidia GPUs
-
1
-
The official BenchMate support thread
in Benchmark software
Posted
With this version GPUPI 2.3 can be run and is valid for hwbot again?