-
Posts
1727 -
Joined
-
Last visited
-
Days Won
17
Content Type
Profiles
Forums
Events
Blogs
Posts posted by suzuki
-
-
I think it is too late guys ,:D
-
This has the potential to be first place,nice chiap and good job. http://www.hwbot.org/submission/3957978_bigblock990_cinebench___r15_core_i3_7350k_764_cb/
-
wow,in 2 cores should be 5850+ easy,just wow.
-
Oh man,great chip but why ddr2 board ? :( In germany you can find many ddr3 boards on the market,too bad you have to repeat this when you will eventually get one.
-
It might go well with samsung ic's,try that until you find your hyper sticks. Why qpi link so low ? Fsb is amazing,go for 4 ghz/5 ghz also,also you have the most efficient board for 2d,nice find.
-
Thank you,waiting for rematch from you :).
-
I am missing an option from bios on classy which it is on Asus . I estimated at least a 3 s improvement but 36” seems doable if you have everything right ,like ram on ln2.
-
On 10/6/2017 at 10:33 PM, George_o/c said:
Ok suzuki, this is the best I can do
Ran on a proper OS today, with my GTRs maxed out. If I had Hypers I could go even further. CPU does not accept the 6.5 multiplier, and it seems that it can not do 500x6, so I'm stuck at 428x7.
George_oc`s SuperPi - 32M score: 14min 24sec 156ms with a Core 2 Extreme QX9650
Now i saw,why capped at 3 ghz ?
-
One from me,other will follow,i hope.
Suzuki- 8m41s922- i7 990x@ 3991 MHz, NB @ 4540 Mhz, EVGA X58 Classified E770, 3 x 2GB Supertalent @ 936 6-6-5-18-52 1T
-
This chip is really good on core and uncore,cannot wait to see it on ss.
To answer your question,+275 from bios ,which is a little over 1.4v.
As freq it makes 5 ghz cb15 at 1.5v and spi32 much lower than that. At 1.35v reaches 95+ degrees on all cores on AIO.,very hot .
-
-
1
-
-
@noxinite - a very good start :)).
-
On old forum this was registered as the most efficient result which is kinda of strange as it could be better by at least 3 seconds.
-
Best sub at 4 ghz ,needs to be taken down . @luumi ,@stavros ,@obscureparadox ,@noxinite ,@tapakah -are you in for a small challenge ? :D http://hwbot.org/submission/2464569_bboyjezz_superpi___32m_core_i7_extreme_980x_8min_42sec_0ms
-
On stage 6 , is it allowed the use of Mars/Ares cards ?
-
1 hour ago, ObscureParadox said:
He doesn't have the best one
Choose your destiny ,finish him !
:))
-
2 hours ago, Noxinite said:
Link? I've only seen them from other OCers.
That’s how i got mine also ,but most of them have it from ebay. There is also some xeon shop which has them listed in ~150€ area ,if you need link.
Anyway , @Luumi has the best one ,make a good offer to this good man
.
-
43 minutes ago, Noxinite said:
I mean L3014s are super rare...
Not so rare ,just 40€ and up for one...
what other cpu’s should be good in this category if mighty L3014 is eliminated ?
-
Who’s gonna be a good lad and compile a list of “optimal “ hardaware for each stage ?
-
Up ,can someone make a price for it ?
-
Reserved it for me.
-
30 minutes ago, Nik said:
shit
Be glad you didn’t bought the rex ,is is broken ,doesn’t work .
-
1
-
-
No voltages checked ,but i did a lot of other stuff.
Checked with E2140 and E8600 ,different ram ic’s (hyper,psc),
Swapped bios with one from a good one , but the same loop restart.
kept it 2 days without battery and clr cmos but nothing.
I put down all the radiators and cleaned the pcb with isopropilic alcohol,mounted everything back and added mx-4.
board doesn’t smell as burned,looks new.
Also,any cpu i put in gets heated so it has voltage. .
-
Board is stuck on Cpu init ,restart loop.
Looks mint condition ,full package ,no bent pins.
Any price check on this ?
Also,have any of you encountered this problem and managed to solve it ?
EVGABOT and Epower
in Sold
Posted
That’s why i hope i was the first one with pm ,before anyone posted over here :). Funny thing is that the op is offline since then .