Christian Ney

Sam, what cpu pll voltage for cedal mills ? atm 7.66 GHz 1.9v -170°C

So I have 20L of LN2 for today. P4 631 SL94Y : 3610A742 : dunno : 5.2 GHz 1.6v P4 631 SL94Y : 3610A742 : 35608442-A0646 :5.325 GHz 1.6v / 7.2 GHz 1.8v -138°C (was out of LN2, today I will give him -196 ) CD 360 AL9KK : L645G598 : 35709271-A1858 : 5.6 GHz 1.6v CD 360 AL9KK : L645G598 : dunno : 5.5 GHz 1.6v CD 352 SL96P : 5634B265 : dunno : 5.38 GHz 1.6v CD 352 SL96P : 5634B265 : 35634284-A1014 : 5.2 GHz 1.6v / 7.2 GHz 1.7v -196°C CD 347 SL9KN : 5651B062 : 2L70132-6A1286 : 5.0 GHz 1.6v

ok thx for the info, I will check the typo and pcb when I will be back home, now I am in the bus go take LN2

Unfortunately on my sheets when a CPU did best than another I overwrite the previous one with the best one . But here is what I have atm: P4 631 SL94Y : 3610A742 : 5.2 GHz 1.6v P4 631 SL94Y : 3610A742 : 5.325 GHz 1.6v / 7.2 GHz 1.8v -138°C (was out of LN2, today I will give him -196 ) CD 360 AL9KK : L645G598 : 5.6 GHz 1.6v CD 360 AL9KK : L645G598 : 5.5 GHz 1.6v CD 352 SL96P : 5634B265 : 5.38 GHz 1.6v CD 352 SL96P : 5634B265 : 5.2 GHz 1.6v / 7.2 GHz 1.7v -196°C CD 347 SL9KN : L540A636 : 5.0 GHz 1.6v So the worst one are missed -.- and sold or on a box named ''dirty CPUs'' I have to check if I kept an older sheet somewhere on a USB Stick btw: with pcb you mean A0109 for exemple ?

^^ Actually I sorted/binned 4 Cadars Mills from 37. These do ~5.4-5.6 GHz on air with 1.6v. the other ones were often 5.2GHz only. Let's hope one is good

One of mine is new, still on the box packed The other one is from china, ''refurbished''. I think I will not touch the vdroop, just let it like it is, this board is just here to hit 8GHz

Many thx for the link , now you guys and LN2 make me want more and more, I will start mod my cards and boards, yayaya even TNT2 and Intel Batman. FB stand for FaceBook ? Do I really need the vdop mod, if yes, I can just do the pencil way or just link with iron or I really need a 50k vr here too ? I am available

Don't kill your NF8

thx mod master lol 50k vr on ebay... from Hong Kong... shipping in 29 days X(

Well I don't know well my two Asus Commando... If I have 50+L of LN2 tomorrow, I will put a Celeron Cedar Mill on it and give it GHzzzzz. If not I will first bench the E6700 on the Rampage Formula (As with the P5E I was limited by the board) and quickly test this Pentium 4 631. Everything is planned Ho btw they aren't modded so only 1.7v max, maybe I will quickly do the vcore mod... 50k vr or 100k vr ?

So you are just lucky

No Yes, Asus No Well done

haha are you serious, do you really think I made it so easy ? You fail

Which motherboard this insulation comes from/belongs to ?

roflol GTX 590 fastest graphic card ? prove it Soyo is the leading yayaya

was the board ~ 490FSB @ stock voltage and ~ 530-540 FSB with high voltages... Damn. Then more is coming next week with the Rampage Formula, I hope.

I forgot to write it I got the serial on my sheets, but not the batch, will check asap and edit EDIT: 3610A742

After the session with the E6700, fuck why I benched PCMark Vantage under LN2 -.- Anyway, I used the only few LN2 remaining hoping to be as close to -196°C. Well, only -138°C ...

Thx Sam, unfortunately I am limited by the motherboard I think 540FSB only. I will try tomorrow with a 570FSB cpu to see if it's the motherboard or CPU.

yep 3850x2 + 3850 it's atm 3x 3850

Out of LN2, but quite happy, 3rd WPrime and 1ret WPrime1024 PCMark Vantage Drunk all my LN2, this Asshole

http://hwbot.org/community/submission/926240_misko78_3dmark06_3x_radeon_hd_3850_20121_marks It's right

w00t

seems ya congratz

ok thx frederik, in da case I will resubmite my LN2 result. And today's ones