[[WTB] GA-MA790X-UD3P or LANparty DK 790FXB-M2RSH]

Thx on ebay, buy MA790x-ud3p yesterday

 

But looking for more.

mine is nothing for you ?

[[WTB] GA-MA790X-UD3P or LANparty DK 790FXB-M2RSH]

Ok perfect, wait your answer

i have just a m2rs sorry...

[[WTB] GA-MA790X-UD3P or LANparty DK 790FXB-M2RSH]

Have a dk 790fxb. Must check for revision first

[Gavbon Clear Out - Hypers, B-die & Kingpin Venom Pot]

I have all the settings written down at my office, won't be there until tomorrow

 

 

Also 775

Ok i can wait

[Gavbon Clear Out - Hypers, B-die & Kingpin Venom Pot]

Voltage for 1800 6-6-5 @Patriot ? and which platform ?

[(FS)1151 cpus/ ram/ gpus]

->FB chat

#6 sold, payment received, #4 put on hold because I need it a few more days probably

[WTB DDR2 Team Xtreem 1300Mhz (PC2 10400) Memory]

if you are interested, i can offer you different pre binned micron d9gmh/d9gkx kits for a good price tested all of them yesterday.

[(FS)1151 cpus/ ram/ gpus]

interested in no.4 if available

[(Appraisal) EP45T Extreme]

Few days ago one was sold on ebay for 66€ with ovp and accessories.

[Kaby IHS]

I would be super interested in that

 

Me too I use Cu ETP, 99,9% pure copper. There is purer alloy CuOF (99,95%), but it's for sure more expensive and I'm almost sure that Intel won't use it in mass production due to price.

me too, but unfortunately i don´t have a skylake or kabylake ihs

[Kaby IHS]

how about the quality of the metal of the stock IHS could it be a cheaper alloy

if i have an original ihs, i could analyze the alloy at work and compare it to bartek´s alloy

[Good Socket 775 DDR3 Motherboard Wanted]

Looking to sell either?

sorry dude

[Good Socket 775 DDR3 Motherboard Wanted]

Both can do 647 mhz with complete setup on air. And with cpu@cascade they can do 650-660mhz. My test cpu is the limit i think

[Good Socket 775 DDR3 Motherboard Wanted]

you could look for a p5e3 premium as well. i have two of those and both do 650+fsb for me.

[Blowout sale - cooling stuff]

I would take one

GPU Mounting kit for phase change, 1,5" evap (chilly) - 20€ (was 30€) -

and one

CPU Backplate with AM4 holes, anodized alu - 5€ -

bartx, you can ship the items from kai (eisbaer) together with my order. i´m in for a skylake/kabylake ihs and a cpu backplate with am4 holes

[L639G 7700k, 7350K, hyper ddr3]

I think it was 1.85v but the sticks have been tested only very shortly. My GTX2 is a bit better.

Are your shure ? Adata, expecially 1866c8 are extremely worse...

[L639G 7700k, 7350K, hyper ddr3]

Voltage for 2000 6-7-6 @adata ?

[Blowout sale - cooling stuff]

would take a skylake ihs too

[LN2 coolers - Otterauge Rev.4 full copper - 2x GPU coolers]

Hey chris, daniel ist bestimmt auf geschäftsreise o.ä. schreibt in whatsapp nämlich auch nicht zurück. Gehe mal davon aus, dass er den kram nimmt

 

Ich hätte gerne die 3x1gb hyper. An dem restlichen ram hätte ich auch interesse !

[[IT+SHIPPING]DDR3 Elpida hyper / good psc]

i don´t recommend adata 2200c8. i tested 20gb of them and almost 16gb are rejects. found 2x2gb that are a little bit over average.

[[WTB] GTX2]

i can offer you only 4x2gb supertalent project x 2000 7-7-7

[WTB 3600+ MHZ 2x8gb Bdie]

I have a kit of ripjaw 5, they can do 4000 12-11-11 and more 32m stabel with waza

[[WTB] - 4K+ cl12 waza stable B-Die]

yes I am, please post or send some screenshots, thanks for reply.

pm

[[WTB] - 4K+ cl12 waza stable B-Die]

I have a ripjaw 5 kit from websmile which can do that ! Are you interested ?

 

anything out there?

[Bringing dead sticks back to life?]

 

Is there any way to possibly revive them? Someone here said to remove the heatsinks, soak them for a couple hours in isopropyl alcohol then bake them in the oven for about a 1/2 hour at 50C.

stefan, my trick does only work on water damage due to condensation issues and you don´t have to remove the heatspreaders for that procedure.