-
Posts
984 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Events
Blogs
Everything posted by GRIFF
-
Can you send a photo of the finished work (at akgrif@gmail.com) in particular area RT9238 and photos of the multi-turn trimmer?
-
GRIFF - BH6 @ 133.6MHz - 133.64 MHz Reference Clock
GRIFF replied to gigioracing's topic in Result Discussions
I'm not used cpucool in this submission, is the limit of bios options. -
GRIFF - SDR SDRAM @ 224.4MHz - 224.36 MHz Memory Clock
GRIFF replied to GRIFF's topic in Result Discussions
4 mhz until the first backup of Christian Ney ))) -
Vcore=2.15V Vnb=2V Vmem=3.9V
-
Only VID mod does not have vdroop.
-
Ok, important notes. Thanks.
-
For Vnb and Vmem pictures in attached pdfs, for other voltmods i make pictures later.
-
14.04.2013 - convert to zip all files 19.01.2014 - add pictures of Vnb mod -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Vnb TUSL2-C voltmod -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Voltmods Asus TUSL2-C ita_rus_eng Voltmod Asus TUSL2-C_Vcore_ita_rus_eng.zip
-
18.01.2014 - add simple vid mod 19.01.2014 - add Ultra-fast and simple mod for VDIMM TUSL2-C, CUSL2 & CUSL2-C. 04.06.2023 - add new link for photos Voltmods Asus CUSL2, CUSL2-C ita_rus_eng Voltmod Asus CUSL2 & CUSL2-C_Vmem.pdf --------------------------------------------------------------------------------------------------------------------------------------------------------------- A very simple VID mod for Asus TUSL2, TUSL2-C, CUSL2, CUSL2-C with HIP6021 pwm controller In this case the values of the voltages in the bios is another plus: * 1.70V = 2.0V (although the datasheet says that must be 0) * 1.75V = 2.1V * 1.80V = 2.2V * 1.85V = 2.3V * 1.90V = 2.4V * 1.95V = 2.5V * 2.00V = 2.6V Simple VID mod --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Ultra-fast and simple mod for VDIMM TUSL2-C, CUSL2 & CUSL2-C. Obtained with the measured real voltage equal to 3.85-3.9V depends on the motherboard and power supply. Mode 'of use: * 1) Insert jumper between contacts 3 and 4 means set 3.6V * 2) start the system * 3) at any time after the first boot screen to enter the second jumper between pins 1 and 2 (as set for 3.4V) * P.S. With two jumpers inserted at the same time the system will not start if the chipset voltage less than 1.95V, tried it on TUSL2 with VNB-C mod that lies above. * With VNB = 2.05V the system also with VDIMM = 3.95V. * END Jumper MEM mod
-
This is a collection of voltmods for these legendary motherboards made by me.
-
Gigioracing - SDR SDRAM - 223.2 MHz Memory Clock
GRIFF replied to gigioracing's topic in Result Discussions
For mod Vchipset write me on akgrif@gmail.com -
Gigioracing - SDR SDRAM - 223.2 MHz Memory Clock
GRIFF replied to gigioracing's topic in Result Discussions
GRANDE !!!!!!!!!!!! -
GRIFF - Pentium 3 733Mhz s370 @ 1231MHz - 1230.95 mhz CPU Frequency
GRIFF replied to vasco9519's topic in Result Discussions
Vcore=2.1V ; Vdimm=3.75V ; Vchipset=2V I am preparing the diagrams and photos for mod Vchipset, Vtt, Vagp, Vcore, Vdimm -
GRIFF - SDR SDRAM @ 222MHz - 222 MHz Memory Clock
GRIFF replied to Ananerbe's topic in Result Discussions
I am preparing the diagrams and photos for mod Vchipset, Vtt, Vagp, Vcore, Vdimm -
GRIFF - SDR SDRAM @ 222MHz - 222 MHz Memory Clock
GRIFF replied to Ananerbe's topic in Result Discussions
Vcore=2.1V ; Vdimm=3.75V ; Vchipset=2V -
GRIFF - SDR SDRAM @ 222MHz - 222 MHz Memory Clock
GRIFF replied to Ananerbe's topic in Result Discussions
Thanks ANANERBE!!! -
Christian Ney - SDR SDRAM @ 228.7MHz - 228.7 MHz Memory Clock
GRIFF replied to gigioracing's topic in Result Discussions
First backup?