Jump to content
HWBOT Community Forums

Arni90

Members
  • Posts

    19
  • Joined

  • Last visited

Everything posted by Arni90

  1. Just as a tip, you might want to push base clock a bit higher to find a good CPU/Ring/memory ratio. Higher memory frequency has a big impact on scores, and LGA1151/1200 doesn't share base clock with PCIe frequency
  2. Some new test BIOSes for MSI: https://www.overclock.net/threads/official-intel-ddr5-oc-and-24-7-daily-memory-stability-thread.1794772/post-29001019 Unify-X A62U2 the log of these new bios: "strengthen hynix oc" "fix external clock gen (bclk oc) randomly stuck in some debug code"
  3. I expect the competition will be tough, but I'm looking forward to it ?
  4. Supposedly the crypto score improves with AVX512. The biggest gain I saw came from setting N:1 ratio to 7 in OS, because the BIOS fails to set the correct ratio on boot for some reason. I mainly struggled with DRAM voltage, and booting anything above 1.70V set, but I understand that's a general Alder Lake issue.
  5. I came in a bit late with my submissions, but didn't really expect to share first place with OVIZ ? If you wanna know how I got that geekbench 5 score, it was basically running the benchmark over and over and over and over again. Still, great fun.
  6. Very impressive for a locked CPU and that motherboard!
  7. Very strong! Funny to see strong Micron results
  8. No you're not: https://hwbot.org/submission/4806581 Also, as long as those DIMMs are A2, you should be able to push higher. Just keep VTT at or below 0.7V
  9. That memory frequency in gear 1 is incredible!
  10. How do I go about doing this on an ASUS M13 Apex? The only RTL "control" I can find is to enable RTL optimization.
  11. Good job! I managed to improve my time further
  12. The competition states that temperatures monitored by benchmate cannot exceed 15C. If I use chilled water at 5C, but idle core temps are still above 15C, is that allowed?
×
×
  • Create New...