Alex@ro

you shall not resist

everyone waiting for 7g chips at 500E

A result of some recent binning, solid cpu doing 6900/6500(6600 cache worked also but not screened) Cinebench R15 tested quickly on Apex X. Ambient proved also strong doing 5400@1.37 undelidded Price is 650E shipped in Europe, payment via paypal or bank account, buyer takes care of fees.

I noticed the same, 4800c14 slower than 4133 c12 in everything except geekbench. Comparing screenshots it looks like the latency is the only thing better at tight timings therefore it should have the most importance for physics,32m etc

Are you sure about memory? I did 4300+ 12 11 11 on kb-x and 4000+ quad channel 12-11 easy on skl-x. Please be aware imc on skl-x is tricky, in the beggining the mem freq had to be lower to improve cbb but latest bios-es fixed this. Regarding vrm board was good for lhe on kbl-x and 1.5V+ worked fine on skl-x 18 core. I am sure you will get good results from either board be it x299 formula , Asus Apex or Evga dark, just don't make decisive conclusions before testing with your own hands.

cpu is sold, thanks hwbot

cpu is pending

You can try to lower RTL initial value as low as you can meaning the board will train most of the times the tightest RTL's possibl.e Then change Offset from 21 21 try to go lower . Manual setting usually will give you 55, tightening RTL at high freq is not easy and also not very rewarding, it looks like the higher frequency you go the impact of RTL's and tertiary is lower compared to let's say 4000.

The 1801 bios was excellent for memory testing , some older kits that had issues with 9900K ( for example would do 4220+ 12 11 on 7700K or 8700K but would not boot anything more than 4080 on 9900K) worked as expected with 1801 bios and 9900K and 8700K. Maybe you can try to reflash and start from scratch.

payment is almost received, can be closed

nobody wants this lol

750 final price

ups

up

Up for sale is the best piece of 7920x i binned through 20 pieces. I don't know how exactly good it is versus average just that this was better than the rest of 19 i tested. Does 4800 mhz cinebench r15 undelidded with 25 degrees room temp , 1.27v set in bios llc6 on Rampage VI Apex. With a delid 5 ghz benchable should be easy on water as clearly the temps you see in screenshot are not great. Comes tray and has intel warranty still available. Price is 800E shipped, payment with paypal or bank transfer. Not looking for trades or upgrades.

card is pending

Some kits you might need to relax trfc to 280, also don't forget vttddr try 0.90-0.95 or auto. If you are using predefined profiles i would recommend relaxing the tertiary's little bit and try again

End of year promotion 1600E shipped....

if you zoom in you see it is micron, samsung not retail yet afaik

Card in box all sealed:

The new Geekbench standard for B-die DDR4-4860 14-14-14-28-2T all air . Voltage tolerance is needed for sticks, DDR4-4800+ requires 2.00V on this particular set. For comparison, at same voltage and temperature the kit does DDR4-4260 12-12-12 but as always YMMV When dealing with 7F code trcd is too tight, on my setup 1T is good for 4600, over 2T is needed. Use maximus tweak1, tcwl 14 twrrd_sg 26 twrrd_dg 20, rest similar to standard 4000C12 more or less personal tweaking. When air or water use manual system agent 1.40-1.50 or more depending on imc, auto is 1.70 for 4800 and you might not feel safe

yes, the card is brand new, i had issues with the first card and galax replaced it in Vietnam, so this one is brand new not tested, waterblock is sealed not used.

haha, thanks, wife doesn't need to know haha

all sold , can be closed , thanks

The pi's are sold, EVC still looking for new owner