Alex@ro

Card in box all sealed:

The new Geekbench standard for B-die DDR4-4860 14-14-14-28-2T all air . Voltage tolerance is needed for sticks, DDR4-4800+ requires 2.00V on this particular set. For comparison, at same voltage and temperature the kit does DDR4-4260 12-12-12 but as always YMMV When dealing with 7F code trcd is too tight, on my setup 1T is good for 4600, over 2T is needed. Use maximus tweak1, tcwl 14 twrrd_sg 26 twrrd_dg 20, rest similar to standard 4000C12 more or less personal tweaking. When air or water use manual system agent 1.40-1.50 or more depending on imc, auto is 1.70 for 4800 and you might not feel safe

yes, the card is brand new, i had issues with the first card and galax replaced it in Vietnam, so this one is brand new not tested, waterblock is sealed not used.

haha, thanks, wife doesn't need to know haha

all sold , can be closed , thanks

The pi's are sold, EVC still looking for new owner

card is in it's box ready to find a christmas tree to sit under

Up for sale some stuff i have no time to play with: #1 G.Skill Pi 2300 4 modules, bought from ebay in competition with websmile, k0-8155 pcb, excellent optical condition, did not test for benchmarks. Selling all 4 as a pack #2 2 pieces of elmor's EVC controller, one was used few times, second is brand new, selling them both as a pack Prices: #1 125 E shipped in eu #2 110 E shipped in eu Payment via paypal or bank account, buyer takes care of fees.

kit is pending

Up for sale is my reliable benching set i used in last 2 years . I only sell these as a pack. #1 4133 Trident-Z 19-21-21 F4-4133C19D-16GTZA Best kit of 100 personal binning. Very low voltage kit, you are looking at 4000 12-11 1.81-2V and 4133 1.94V for s-pi 32m. wazza Together they do 4140 12-11 Wazza, one stick has low voltage tolerance for S-pi 32M so it stops at 4140 1.94V, the other stick is literally retard scaling up to 2.04V and reaching 4240. I don't have screens from the single channel testing but i will refund the buyer if this stick ( S/N ending 957) does not meet expectations. Geekbench scaling is good for both sticks ==> 4240 12 11 11 working easy The kit has original H/S mounted and never removed, they perform better when little cold and most likely with perfect temp control these results will be improved. I never removed H/S for warranty reasons. #2 4133 Trident-Z 19-25-25 F4-4133C19D-16GTZ Old and very rare kit, the first 4133 kits produced by Gskill, iirc only a dozen were up for sale. I bought these from a forum member and the h/s was removed before. After few weeks one stick died and G.Skill warranty sharp eye noticed the removal of h/s, so the warranty was denied. So one stick is dead and one is alive and kicking. Does 4150 12 12 wazza 2V and 4260+ geek 12-11 Most of the times i used the stick with S/N ending 957 from #1 together with this stick. They maxxx out when little bit frozen at 4280 12-11-11 Geekbench and 4300 XTU. The best thing is they have no typical b-die slow-boot when they are around or under 12 degrees, so you can train very fast 4200 12-11 without wasting precious time. The price for whole package is 400E shipped in Europe. I will not sell separately #1 kit so no need to ask this. Can also shipp to other continents so feel free to ask. payment via paypal or bank account, buyer takes cares of taxes or sends as friend.

bump

let's see if 1700E is better

bump

Up for sale a second card 2080TI from Galax. Card is brand new, not tested either or water or LN2. Comes with full package including backplate, unused waterblock and other stuff. Retail, bought from webshop with invoice and warranty I only pictured the card but the buyer will receive full box and everything. Can be shipped next week, price is 1800E including shipping. Payment via paypal or bank account, buyer can either send as friends or cover the fees.

bios 0057 works easy with A2 pcb, previous bios need to set CMD RATE ==> N:1 and it will have no issues 4133+. Performance is pretty much the same as 1T in geekbench at least, found very small difference if any. For Maximus IX Apex and Maximus X Apex running A2 PCB ==> TCWL needs to be set to 14 and also twrrd_sg ==> 25 twrrd_dg==> 21, this makes 4133 easy train and run if kit is capable. 2.0V is limit for dimm voltage without LN2 mode, use ln2 mode and manually set voltages like regular mode, you should have no problem. Example of safe voltages for air/water set manually PLL Core Voltage to 1.00V, Pll Termination 1.20, Cpu standby 1.10, Pll Bandwith lvl 0 , DMI 1.00V, little bit raised pll termination of 1.20 will max out the cache as well.

wow, strong eff bro!

improves a2 dimms overclocking

no, sorry buti want to make a single pack to avoid shipping hassle and such....

push

Fixed some bugs regarding ram

Updated first post with latest bios : 0044

For benching you can try, nobody knows what safe is considered but after few hours at 1.9+ i have seen no degradation. For Samsung B-die at least values of 2.05-2.1V over a few dozen hours did no harm but as you know ymmv.....

I'm voting for comp points as well, i am not sure how many people realise the effort needed for qualifying, travelling, benching live in a contest final.... Even online contests, binning parts and buying vendor selected stuff, etc.

thanks, sold, thanks hwbot

Up for sale the best piece that resulted from recent binning. Cpu is retail with invoice from shop, comes in original box. Tested on water ( normal water not chilled) it did 5300 @1.29V set in bios llc6 Apex X Z370 Ln2 showed Cinebench passing 6860. Easy to bench, no CB or CBB with RSVD on. Price is 1200E shipped in Europe or USA, payment via paypal or bank account.