Alex@ro

Hey Flanker,i wrote about this here: http://forum.hwbot.org/showthread.php?t=148427 Basically you need to set TRDWR_sg TRDWR_dg and TRDWR_dr + TRDWR_dd same as cas . In your case i would try 12-19-19 1.8V and set these TRDWR_sg TRDWR_dg and TRDWR_dr + TRDWR_dd to 12 manually. Also leave IO and SA auto

sold and can be closed

ok so let's make this 100E as final price.

Bump Sent from my SM-N910F using Tapatalk

Humpy dumpy Sent from my SM-N910F using Tapatalk

Back to sale Sent from my SM-N910F using Tapatalk

Pending Sent from my SM-N910F using Tapatalk

Hello folks, Up for sale a kit binned from a dozen of his kind particulary impressive at TRCD limits and low-voltage.Tested on 22 ambient air cooling and M8E it did very tight: 4000 12-19-19 at 1.88-1.89V 32M 4000 12-18-18! boot and run Spi-1M Very good TRCD should allow this in benching 4133 12-19-19 on proper setups . It won't match B-die but its a great performer in his category and can do high-speeds easy even on 64-bit os Asking for 110E shipped in Europe.

How highe do we need to bribe the one that finds James trick ? As someone else said i am pretty convinced it's some sort of tricky combination and lucky run , deserves all credit !

Heads up Sent from my SM-N910F using Tapatalk

Now that is nice info! Over 1.95v? Sent from my SM-N910F using Tapatalk

I bave a thrsad for 5960x... Sent from my SM-N910F using Tapatalk

What sticks are these, 3600c16?

Yes, we only ride donkeys then milk them Sent from my SM-N910F using Tapatalk

I had 4 kits so far of 3600C16 G.Skill 2 kits pretty mediocre,ran 3866 13-13-13 1.82 could be little lower 2 decent kits: 1 module 3866 12-12-12 M8E ==>1.76V.4000 12 12 12 Impact 1.84V 1 module 3866 12-12-12 M8E==>1.815 4000 12 12 12 Impact 1.89 2 module 3866 12-12-12 M8E==>1.82V 4000 12 12 12 Impact 1.905V All voltage measured with DMM. Waiting for more with a help from special buddy

russians back from hibernation

THis should be very good on ln2 i think,when i did 5200 vantage and xtu the temps on evaporator went to -30 When gpu-pi finished at 5300 @1.47 i had -23 on evap and big positive temps all over in realtemp

ouch

Bump Sent from my SM-N910F using Tapatalk

usually imc to blame,play a little with volts,maybe too much or too little...You also want to make sure the socket is perfect clean and your mounting is good. Coupling board with good imc cpu and b-die can results in good results,DDR4-3600 11-11-11 all air on 1.84V:

1000E last offer price,i retested cpu today and the IMC is even better than i tought,probably one of the best to exit intel factory.All air cooling. B-die 3600 11-11-11 on Rampage V extreme,stock VCCSA voltage,1.84 Vdimm.Cpu has vid of 0.912 for whom interested.

-55 evap, cpu with tight mount barely goes positive for a few runs in a row Sent from my SM-N910F using Tapatalk

Sold Sent from my SM-N910F using Tapatalk

Bump Sent from my SM-N910F using Tapatalk

keep on moving