ScunnyUK

Hi, Im just trying to browse the results in e2140 category here> http://www.hwbot.org/hardware/processor/pentium_e2140_1.6ghz/ but many are wrong. For instance PCM 04 record shows a Pentium 3 UC Bench score, PCM Vantage record shows a 3DM 03 result, Spi 32m record shows a Pentium 4 D 960 Wprime result and PCM 07 record is showing as a Phenom II x4 960 PCM Vantage result. There are too many for it to be a case of ppl accidentally submitting to wrong category. Also I sometimes get this error when I try clicking any of the Rankings links>

Hi , voltage was around 1.65v - 1.69v. Stock settings are 2400Mhz @ 9-11-9-28 with 1.65v. Although the timings in this run are @ 8-9-8, I have had them running @ 7-9-7 with different bios'es on the P67A GD65.

Awsome result Olly , great work bud

The rules came into play in May 2008 (date is shown in the link posted above),This result was submitted on 30th April 2008, Presumably it was not mandatory to have cpu-z cpu + cpu-z memory tab in the screenshot at that time?. However there is a link to the cpu-z database showing the required information and although this isnt compliant with the current rules today, it was reported by a user back then, subsequently moderated by hwbot staff and considered to be ok.

Hi Rbby258, Thats one beast of a system you have there Come join us at Benchtec.co.uk forums if you need any ocing tips, advise or even just to say Hello

just 3 for this round

Hehe tnx bud, first time ln2, first time with x58 ! This is fun in a nightmare-ish kiinda way !!!o_O

Ahh thanks RB that has worked now

Its not working again ?? * A verification link is required. - your submission does not comply to this rule Verification url must match pattern: http://anrieff.net/ucbench[0-9]{0,4}/viewitem.php?\?id=[0-9?] Trying both with and without the 2011. http://www.anrieff.net/ucbench2011/viewitem.php?id=2725

Thanx , its a shame it wont bench at anything close to that though

There seems to be a problem with the submissions page A couple of guys are getting an error when trying to add thier validation link.. "* A VERIFICATION LINK IS REQUIRED. - YOUR SUBMISSION DOES NOT COMPLY TO THIS RULE VERIFICATION URL MUST MATCH PATTERN: http://HTTP://ANRIEFF.NET/UCBENCH2011/VIEWITEM.PHP?\?ID=[0-9?]*" Even though the link is correct ???

Very Nice mate Gorgeous looking system aswell.

Sweet Chip and nice result Congrats dblooi!

Nice Work Kenny mate

Nice Work Doc

Congrats to the winners:-D Nice work everyone :-)

Hey George, all my bclk results with this board have been done with ss, but the other result (107) was done with high multi and high ram Mhz so most likely fell over due to not enough vcore or vddr

Well using tRCD 10 does allow me to achieve higher bclk on the 1:8 divider, my current result in the bclk class is at 107 on that divider Good luck in your exams George

Hmm this is interesting, we just had a memory comp at OCN and some of us couldnt push bclk any higher than 101bclk on the 1:8 divider while others could reach 105bclk easily. I thought this was due to different sets of ram being better and / or good imc.But after your comment about problems with tRCD running at 9 I just anilized the results more closley and noticed that all the guys who can achieve over 101bclk on the 1:8 divider have had to use tRCD at 10. I think I need to test this and speek to some of those guys to see if they have problems with tRCD 9

Hi George, I have all kinds of wierd problems with this board but it seems ok running with tRCD at 9 With my first board, the Rev B2 before I swapped out for this B3, it was ok running tRCD at 8 (6-8-6-24),on the 1:8 divider. Now though Im not sure if my chip and / or ram are degrading ( I have been taking it very easy on them , imc has never been above 1.35v ) or possibly need to go back to an older bios. Have you been having problems with it George?

Amazing result, Nice one baz

Yes you are correct, the one submission in Spi32m is running on 1333Mhz divider but the lowest divider on the board is 800Mhz. however , I suspect that maybe he had problems trying to use the 800Mhz divider because I attempted it last night and could not get my ram to run on that divider. The lowest my paticular setup will do is the 1066Mhz divider.

+1

Hi DarkDareDevil and welcome to the team Just for your info, you can edit or delete any submission you make if you happen to make a mistake. At the top left corner of the Score's page there are 2 tabs, 'Info' and 'More', click on More then under 'Options' you should see icons for editing and deleting amongst other things. Nice scores mate

First off, if hwbot wasnt here, if there was no ranking system I would still be benchin for love of it and as a hobby. Nobody is fogetting anything here. You can call it a competitive hobby if you like but I'll call it a sport because like most sports we have teams, leagues and rankings thanks to hwbot. I think its fair to say that many things can be both a sport and a hobby at the same time Because hwbot brings the competition with these teams, leagues and rankings then the most important thing becomes (legitamatly) earning the points for you and/or your team to do well. Doing well isnt just about the E-Peen, but if you do - do well then you are entitled to the braggin rights Being part of a team means aiming for somthing more than just personal gain. It means you want to help the team and contribute towards the end goal. It also means you want to see the team as whole do well and not just a couple of the highest contributers within the team. Anybody who can not grasp the meaning of this shouldnt be part of a team at all.