tiborrr
-
Posts
545 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by tiborrr
-
-
I'd like to point out that Intel DP67BG has fantastic 01 performance. I did not had much luck with Giga UD3 yet
Tempted to get another DP67BG after Moonman and I fried one last saturday. The only downside is 1MHz BCLK increment. -
(last pic) Moonman smiling at frames in 3DMark03
-
Heh, I have already traded this card for a HD3870 GDDR3
-
No problems, buddy. I did not accuse you of anything. If it's repeatable, then great!
Best Regards, N. -
Any solution? :shrug:
Also, we didn't agree upon having points for split categories. See this:
http://www.xtremesystems.org/forums/showthread.php?t=266394&page=3 (post #70 and beyond)
-
Already joined but still:
After re-typing:
-
I'm having an issue which is preventing me from posting my results. Despite being a moderator and also typing in the appropriate password it still says that I have no right to post result in the competition. There's something really wrong with the whole password protected competition.
Anyway, here's my result - http://hwbot.org/community/submission/2128207_tiborrr_3dmark2001_se_radeon_hd_5450_gddr3_52064_marks?new=true
Please move it manually to the competition ladder.
-
A W E S O M E ! ! !
-
Bravo mr. Monstru!
-
It's probably CAS5. I have to check with mbench when I have time.
-
I believe these memories can go above 700MHz 4-4-4-12, but the CPU was holding me back. Bad sample
-
Looks like we are all having issues with 52x+ multi on Jiggabyte boards. I'm also stuck with 52x, rarely 53x with UD3, no matter if the CPU is at -95°C or +35°C
Could it be also that there are just some chip that are unwilling to go beyond ~ 5300?
-
Air, water or Dry Ice it matters not my CPU does not budge beyond 5.288GHz. My husband has the same batch and the same problem. Only difference his CPU will do 5.288 @1.460 volts mine needs over 1.5 for 53x multi.
So ebay it goes and next....
What board, 1Day?
-
Mine work at ~ -95°C but halts at 52x/sometimes 53x multi. Same as on air. I don't know if it's mobo- or CPU related.
-
Damn, I'll try another CPU this week and see what happens. Hate/love relationship with Sandy is starting to lean toward hate more and more
-
Im stuck at ~ 52x, very rarely boots at 53x, no matter the cooling or voltage (up to 1.7V at -90°C). Is this a mobo issue (UD3 F6b)?
-
L039B470 s/n 4 last digits 1633
4/8 threads. 5GHz IBT standard x 20
max 5050MHz Vantage CPU test + 3DM11 etc.
Aircooling.
Tomorrow I will get L040BXXX
How much juice buddy?
-
Massbo, I have updated the post, the last four digits. Post no. 11.
Also added a CPU-Z valid.
-
Yeah, F6a shows improvement over F4. Before it refused to post or work above 4.8GHz, no matter the multiplier, BCLK or core count. Now the chip does 5243MHz benchable with 1.435Vcore on ambiental water cooling!
That's with two cores enabled though. I'm gonna push some cold this weekend with my D.I.Y. cascade, add some volts and see where it gets me. If it's gonna be too cold for the IMC, I'm gonna try single stage unit 
-
Dang, where's that UD3 PLL fixed BIOS when you need one?
-
Regarding UD3:
Great to hear that Masbo!
any news on ETA? -
Multiplier mobo limited, Vcore = 1.435V
Procesor: Core i7 2600K
Stepping: D2
Batch: L038A646, last 4 digits: 1644
CPU cooling: water cooling (29°C)
Board: Gigabyte GA-P67A-UD3 (bios F4)
Stability test (Prime95, Orthos, Linpack, ...):
CPU-Z (2cores, HT off) with PLL overvoltage BIOS F6a:
Vcore still @ 1.435V:
Benchable/Prime stable at the same frequencies, 2D & 3D.
-
Any news on UD3?
-
Ci7 2600K. Damn, I'll have to switch the mobo or what?
3DMark01 needs right board/bios.
in Sandy Bridge (P67/Z68) OC
Posted
Massbo, I'll do them later this day if the boss will be out of the office
I used HD3850 oc'ed to 1170/1161MHz at 5288MHz (53x99.8), Cat 9.4 drivers.
System tests should be comparable:
http://hwbot.org/community/submission/2136591_tiborrr_3dmark2001_se_radeon_hd_3850_107250_marks
CH: 531.8 @ 5288 (was as high as 534 in previous runs)
EDIT: OK, now I see, it's on par with UD4 F6x