tiborrr
-
Posts
545 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by tiborrr
-
-
Nice to see EK-VGA Supremacy in action. Let's see what this card can do at subzero temperatures.
-
Hideo back in action!
-
Thanks Forteoc. My pot is partially make of plexiglass therefore only needs some thin sheets of insulation. Only 2 of these pots are in existance, one is at NickShih (or maybe it has returned to SF3D) and one is with me.
-
Excellent effort, push for more!
-
Thank you all. With a non-X card it feels like being an only white runner among the black ones.
Time to check what my best X card can do. Mining was at least good for something
-
15L of LN2 and this?
I wasted the rest on my FX-8320. Priorities were certainly not set correctly
-
Excellent effort, great run!
-
Like l0ud Silence would say - relevant sauce:
-
Don't know, never tried. Did Prime95 at 1.2V @ 4325MHz, no throttling, as far as I remember.
-
Excellent effort overall!
-
This is my best R9 290 non-X card, sadly the memory IC does not scale with voltage. Have to try my BBA R9 290X as well next week.
-
Thanks Farjam. There should be some reserve left in this CPU. Board needs some mods first.
-
-
-
Nice picture but useless simulation
-
Amazing run! Can't wait to see what you can muster using GTX 780 Ti DC2T!
-
Wrapper doesn't start at all, Windows XP SP3, GeForce GTX 470 on single-stage @ 1020/2300, 327.23. Finished the benchmark if I run the original benchmark.
Every time i want to bench AM3 something doesn't work at all
Tired of this, really.2.27 works for me, used the same Windows XP SP3 system, it's one of the latest MS builds issued I have used for several years with no problems. Are these submissions still accepted?
EDIT: Just read it, 2.51 is mandatory from Jan 14th on. Let's hope you guys polish this little cute wrapper up before then
-
Wrapper doesn't start at all, Windows XP SP3, GeForce GTX 470 on single-stage @ 1020/2300, 327.23. Finished the benchmark if I run the original benchmark.
Every time i want to bench AM3 something doesn't work at all
Tired of this, really. -
Great work Petri, excellent setup! EK-SF3D Inflection Point EVO for the win!
-
I could run 990FXA-UD7 at 410 something on a Sempron 145. HTT wall also depends on the CPU, I have seen variances of about 40MHz from worst and best.
-
I though AMD APUs come with soldered IHS just like the AM3 CPUs. Great work nonetheless!
-
Bravo Franc, kar tako dalje!
-
Okay, thank you my friend!
I have the screenshot as well. -
I had the same issue today as Moose, but it was because I made an too long entry in the Memory Model form. I changed it to 'HyperX' only and then it worked.
I have another issue, I have finally found time to upload results but when I try to upload the .hwbot file it says "Unable to decrypt the datafile". Is there a way to manually check it? I can send the files. AFAIK these were made with 2.25 or 2.26 (mid July 2013).
BenchBros - Radeon R9 290X @ 1500/1700MHz - 5184.38 DX11 Marks Unigine Heaven - Xtreme Preset
in Result Discussions
Posted
Nice. My Hynix fails to go past 1700-1750 stable as well, no matter the voltage. There is also an IMC to consider, not just memory IC.