-
Posts
852 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Lucky_n00b
-
-
Congratulations for entering the sub 4min 32M - awesome score man !
-
-
Nice clocks on water :)
-
A little bit more to sub 4mins club - keep pushing it!
-
11 minutes ago, ground said:
so... is there something to the claim of kingston djr pcbs being different and easier to clock to high frequency then other brands? Looking forward to cold results!
Unfortunately I have tested very small numbers of samples for Hynix DJR (only 3 kits total, this hyperx 4600, V-Color 5066, and a local RAM brand called V-Gen rated at 4600), so can't really be sure if the PCB component making much difference between these 3, all used what looks like 'A2' PCB to me.
From my side it's the memory controller on CPU that might be more important, from 3 RKL CPU I have, this particular one managed to boot at DDR4-6200+ on ambient, while the other two won't budge past DDR4-5866 even with the same exact board, RAM, and voltage.
- 1
-
51 minutes ago, Leeghoofd said:
Stage 3: Cinebench R23 with BenchMate per core
- Use BenchMate version 0.10.8
- Dual Channel Submissions only.
- Screenshot with CORSAIR desktop wallpaper as background; CB23 render, Benchmate score, CPU-Z 1.97 CPU tabs for Processor, Memory and SPD.
- Stage 3 care Package
Need clarification :
Showing all R23 window + the rendered screen without cpuz/benchmate obstruction mandatory?
*If yes then probably need DSR/VSR to 1440p
-
-
Not bad? That is GODly for a 50 USD kit - I'd happily pay 150 USD for this kinda stick hahahahah
-
Thanks!
Me too, I was not expecting this micron to be this strong for clocks, (but then again I don't usually bench micron kits in the last 2 years), this is best sticks out of 4, I got big variation between them, maybe because this comes from lower bin model (3600MT/s), but the worst stick still managed to boot 5500+. -
Strong score to finish stage 1 - congrats
-
Just now, Leeghoofd said:
its not over yet!!! That's not the Alva I know, you must be an imposter ?
Hahahah still pushing for Stage 2, no worries Dad ?
- 1
-
Have to call GG on this competition, those DJR were very strong indeed!
I tried to push the rev3.32 microns as hard I possibly could, frequency is priority for AIDA64 read but my DDR4-5466 18-24 wasn't enough to catch up the b-die level let alone DJR, got good learning experience out of it anyway.Waiting for the Lucky Draw then ? - keep pushing it bros
- 1
-
WOAH that is almost DJR level clocks - Strong score!
-
-
I like no. 4, listing the 12900K as default to compete in 16C, and 12900K (8P+0E)
And maybe use same rules for other mixed core CPUs (e.g on its own as total number of cores, and only the number of performance cores)
-
Now I'm praying no major hw release inside the competition timeframe, so I have time off work to have fun in the comps
Btw, I haven't seen platform/cpu restriction for this, so any DDR4 cpu/platform (as long as its retail) might join?- 1
-
Thanks - About the 1T, I got similar experience. But after checking with 2-3 CPUs, it seems that this 1T Gear 1 capability is also dependent on CPU (I got other samples that can do 1T at 3733, but cannot get it pass 3800 Gear 1 even at 2T). About the RTL, I just started exploring couple board, got sent an APEX and Tachyon, might explore that area after I'm done with review work :)
-
Whoa, good job finding this chip - 4-core Zen3 is FAST :o
-
Strong result bro ;)
-
CRAZY SCORE - amazing effort as always :)
-
-
Whoaaaaaaaaaaaaaaaa Congrats!
-
Hi Guys,
Here's a link to a set of ocer BIOS for the:
- MSI X570 GODLIKE
- MSI B550 UNIFY-X
- MSI B550 UNIFY
This one has AGESA 1.2.0.1 - said to 'fix L3 Cache Performance on Vermeer CPU'.
I'm planning to test these out in the following month, but at the time of writing I haven't personally tested them yet to see what other overclocking enhancement is on them.
Cheers,
- 1
- 4
-
oc_windforce - Ryzen 3 5300G @ 5504.1MHz - 2min 4sec 415ms GPUPI for CPU - 1B
in Result Discussions
Posted