Massman Posted January 3, 2011 Posted January 3, 2011 Fixed Sandy Bridge OC bios F5x http://91.121.148.119/downloads/BIOS/p67aud4.f6x Quote
Massman Posted January 3, 2011 Author Posted January 3, 2011 I'm seriously getting sick of this board constantly flashing my main bios (F6x) to the backup bios (F2) ... Quote
kirbster Posted January 7, 2011 Posted January 7, 2011 me too.. how do you flash the backup bios? or can you? Quote
oanvoanc Posted January 8, 2011 Posted January 8, 2011 (edited) im stuck trying to flash the f6x on my ud4... with q-flash utility i get the error message: "invalid bios image" with @bios the software crashes after reading 100% of the bios file. tried the f6x provided by massman and pt1t from here: http://hwbot.org/forum/showpost.php?p=87044&postcount=9 what am i doing wrong? edit: trying right now dinos suggested bios flash tool from here: http://www.xtremesystems.org/forums/showpost.php?p=4695291&postcount=27 will report back later... Edited January 8, 2011 by oanvoanc Quote
Massman Posted January 8, 2011 Author Posted January 8, 2011 Go into Windows 7 64-bit and flash the bios using the @Bios 2.10: http://download.gigabyte.us/FileList/Utility/motherboard_utility_gbttools_gbt_atbios.exe Quote
oanvoanc Posted January 8, 2011 Posted January 8, 2011 wow, thanks for the fast response. im still on xp... superpi-purpose you know still have no clue, why the q-flash tool didnt work. anyway, i used the "old" @bios tool from the gigabyte driver disk, which came with the mainbaord... the new version linked in my last edit worked now. thanks Quote
oanvoanc Posted January 9, 2011 Posted January 9, 2011 just played around with the ud4 and 2600k. cpu is capable of 5,1ghz (51x100) (3dmark06 cpu-test stable) with the following settings: internal cpu pll overvoltage: enabled real time ratio changes in os: disabled intel turbo boost tech.: auto turbo ratios: auto turbo power limit (watts): 1000 (auto works fine for me too) core current limits (amps): 500 (auto works fine for me too) cpu cores enabled: all cpu multi threading: enabled cpu enhanced halt (c1e): disabled c3/c6 state support: disabled cpu thermal monitor: disabled cpu eist function: disabled bi-directional prochot: auto voltage settings: load line calibration: enabled cpu vcore: 1,50v qpi/vtt voltage: 1,12v ("normal" works fine for me too) system agent voltage: 1,135v ("normal" works fine for me too) everything else: auto achieved with watercooler (single radiator in cold water was necessary as the load temperatures above 70 degree celsius resulted in crashing 3dmark06) for 5,2ghz i raised the vcore to 1,55volt Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.