Jump to content
HWBOT Community Forums

(FS)GSkill/Apacer DDR4/ vintage VGAs


Recommended Posts

  • Administrators


up for sale is some of my remaining hardware I tested now again to work, all works fine




1. 2x8GB G.Skill RipjawV DDR4-3600 C16-16-16-36 1,35v


Used for a couple of tests and benchmarks recently, B-die, they do 4000 12-12-12-28 1T tight 100% reliable (tested on MOCF and Impact8), 12-11 works as well normally even with waza, but I have rare fails. 4100 possible even with imc on air, this depends on imc and board quality though. Retail in blister.



2. 2x8GB Apapcer DDR4-3733 17-19-19-39 1,35v


The kit is from a competition I was at, slight remains of vaseline are on one side of the sticks. 4133 18-19-19-39 1T 1,35v stable memtest and 32m on MOCF, something not even best gskill, patriot or geil I had did. Benchstable 3866 12-11 around 1,8v BIOS, I used these for a pile of 2D and 3d tests I did recently and they were doing well Compability is not great on these sticks, 4k does not boot on my mocf despite quality of sticks and ics being good. Bulk




3. Palit Geforce 250GTS 512MB


Works, 2 six pin connectors




4. Gigabyte Radeon X1950 Pro 256MB


works, please note that old cards like these do not boot or work on all modern boards, I tested the card on 1155 and it worked flawless.




1. 160 Euros+ shipping sold

2. 100 Euros+ shipping

3. 20 Euros+ shipping sold

4. 15 Euros+ shipping sold


Payment with paypal or western union, shipping depends on item and weight, on the graphic cards I will only ship to eu, mems I can ship for 10-14 Euros with deutsche Post depending on insured value


Disclaimer Private sale, no returns accepted and I also rule out any kind of warranty by me

Edited by websmile
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...