gradus Posted January 16, 2011 Posted January 16, 2011 why you share one cpu to 2 members. post one cpu to one member plz. ps http://hwbot.org/community/submission/2107227_xpuctoc._superpi_core_2_e8400_3.0ghz_7sec_312ms Quote
The_Game Posted January 16, 2011 Posted January 16, 2011 Does it matter? We both played with the CPU and this kind of cooling we cant post together, so.. . Quote
The_Game Posted January 16, 2011 Posted January 16, 2011 @GraduS I`m not sure about the rules, but I cant see a problem when we both bench. I`m not going to upload his shot again, and he is not going to upload mine too. This way we both receive points and I think its fair. The CPU and the board are mine and he is supporting with memory and cascade, also helping with DICE on the NB so its 50/50. Quote
TaPaKaH Posted January 16, 2011 Posted January 16, 2011 I see nothing wrong as long as you don't submit multiple scores from same CPU/session into one category (benchmark) Extremely impressive job there, not many E8600 can hit 6.4 with cascade temps. Quote
The_Game Posted January 16, 2011 Posted January 16, 2011 Yeah thx man that`s a golden CPU. For sure the CPU was not the problem here(I even didnt try to lower Vcore just wanted to be sure its not the CPU stopping me). The second core is worse(can run super pi 200-300Mhz lower) so if I disable it I can go way higher but we were running out of DICE, so next time I hope for more and may be LN2 for the NB. Quote
.D3vil. Posted January 17, 2011 Posted January 17, 2011 Congrats! Im sure it can hit wr just need to work hard on LN2..anyway its very nice! Quote
The_Game Posted January 21, 2011 Posted January 21, 2011 Next week LN2 for the NB . CPU will be on cascade again it does not need more cooling the board is the problem . Quote
TaPaKaH Posted January 21, 2011 Posted January 21, 2011 I wouldn't expect to see CPU to hit over 6.4 on cascade / NB scaling from going dice->LN2 you need to turn the cascade/LN2 the other way around and then give it a go Quote
The_Game Posted January 22, 2011 Posted January 22, 2011 We will see where is the problem . This is with 2 cores enabled as I said the second core is worse and stops 200-250MHz lower so I`ll disable it and see what`s going on . Also I do not think the CPU is the problem at 710FSB I can run SPi 1M but it freezes at 15-16 loop, normally when CPU is the problem SPi crashes with error also I never tried Vcore above 1.8v . I hope i`ll have more time to play next week and see where the better cooling is needed . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.