Jump to content
HWBOT Community Forums

[FS] Top Binned 8700K's !


Recommended Posts



Up for sale are 3 8700K's  i found from a few dozen pieces i binned lately. Binning was done on water and for those 3 pieces i delidded them and replaced stock grease with liquid metal Conductonaut. Room temperature was 24-25 degrees with a good water cooling, obviously not as strong as a hailea chiller some guys use but my results are always comparable to other wc solutions or AIO. Motherboard used was Asus Maximus XI gene with llc6. I would also like to add that the voltage i mention is the one that i set in bios or turbovcore, the one that cpu-z shows is lower, for example 5500@1.34V set in bios resulted in a load cpu0-z voltage of 1.296...


1., Nr.1 Best one i found and also best one i had ever on water. 

Does cinebenchR15 5400@ 1.28, 5500@ 1.34, 5600/5300 cache @ 1.44V. , 5400 cache also worked but did not screened it

Beside the amazing core this cpu has a killer imc, it can train and boot 5000 in Dual-Channel! and also train and boot 5200 divider in single channel.







2. Nr.2 Vietnam batch, really solid and it actually also did 5600 three quarters of run at 1.49 however temps went over 80 and it crashed. 

Does cinebench R15 @ 5400@1.31, 5500/5300@ 1.38V

Strong imc as well, can train and boot 5100 divider on water single channel. 






3.Nr3 Solid cpu as well,  pretty close to nr 2 but 5600 would not go, might be because one core is hotter than the others and i have to reapply conductonaut better, who knows.


Does cinebench r15@ 5400@ 1.33, 5500@1.40v


Strong imc that will train and boot 5100 divider on water single channel. 





Prices are

1. 700E

2. 500e

3. 450E


Prices include shipping in Europe and i can shipp till 23 may, later i will be in Taipei for 2 weeks so if you decide in this period your cpu will be shipped on 7th of June.


Payment via paypal or bank transfer ( would actually prefer Revolut). 





Cpu's will be properly packed and shipped unlike the french method shown on some thread here :)) 

Edited by Alex@ro
  • Haha 2
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...