techjesse Posted June 16, 2019 Posted June 16, 2019 Benching a i9 9900k, ROG Apex x Z370 and GTX 1080Ti SLI ? I had great success this time. The mobo ran great and when I wanted to run one GTX 1080Ti, shut down flip the dip switches, power back up. CB at -122c yet under load I saw -130c, no running full pot yet. I benched it lite this time....lol Made 31 subs with 30Lt's of Ln2, 7 1/2 hrs benching... it was a BLAST....Yeah Made time to run this...https://hwbot.org/submission/4175899_techjesse_3dmark_vantage___extreme_2x_geforce_gtx_1080_ti_98036_marks I like this one too... https://hwbot.org/submission/4175912_techjesse_3dmark___cloud_gate_2x_geforce_gtx_1080_ti_85168_marks Shut down and booted into Win 8.1 to run this https://hwbot.org/submission/4175927_techjesse_hwbot_x265_benchmark___4k_core_i9_9900k_21.08_fps then finished with Win 10....https://hwbot.org/submission/4175887_ I ran a lot of benches 2d and 3d.... next time I'll concentrate on a few less with better settings and notes ? Quote
techjesse Posted June 16, 2019 Author Posted June 16, 2019 Almost forgot... I was all over the front page.... ? YEAH! Quote
techjesse Posted June 16, 2019 Author Posted June 16, 2019 I pulled the Ln2 pot, removed all the kneaded eraser, let her dry out for a day. Installed the water block and fired her up,ran a few tests and she runs great. Have more to do...... ? Quote
Alex@ro Posted June 16, 2019 Posted June 16, 2019 Happy tha you had fun, but please remove that eraser stuff , throw it in garbage and never use it again. It is the worst thing to do, you basically don't isolate anything but create problems of condensation compared with not running anything at all. Either vaseline or coating, or just use inferno heater and no insulation at all, just paper towels. 2 1 Quote
Splave Posted June 16, 2019 Posted June 16, 2019 Awesome session awesome pictures. I hope you make another thread the next time you get ln2 which I also hope it's soon ? 1 Quote
techjesse Posted June 17, 2019 Author Posted June 17, 2019 I'm using my old Koolance V2 Ln2 pot and would like to run full pot, maybe I need a new KPC T-REX pot and a KPC INFERNO heater plate to do so, what do you think? Quote
Splave Posted June 17, 2019 Posted June 17, 2019 11 hours ago, techjesse said: I'm using my old Koolance V2 Ln2 pot and would like to run full pot, maybe I need a new KPC T-REX pot and a KPC INFERNO heater plate to do so, what do you think? Full pot should be doable with your koolance just a matter of finding the right settings 1 Quote
techjesse Posted June 17, 2019 Author Posted June 17, 2019 I think your right, the v2 has a lot of mass and little swing under load. The right settings.......PM sent Quote
techjesse Posted June 26, 2019 Author Posted June 26, 2019 Hey Guys, Added a few things I have been running 8gb 2x4gb of ram (Corsair) now I have G.SKILL TridentZ Series 16GB running 4000MHz CL15-15-15 1.35V. I'll use these next time I do this....soooonnnnn 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.