Jump to content
View in the app

A better way to browse. Learn more.
HWBOT Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Eisbaer798 - Core 2 Duo E6300 @ 4465.6MHz - 9min 33sec 546ms wPrime - 1024m

TerraRaptor
in Result Discussions

Featured Replies

Unfortunately, the CPU does not like high PLL voltages. The system no longer starts with more like 1.95 volts. In addition, I couldn't change anything on the FSB wall with an increased PLL voltage. FSB wall is the same as under my cascade with -85 ° C and low PLL volt

CB-140 ° C benching with max. -135 ° C CBB was not an issue, started straight away

Edited by Eisbaer798

  • Quote

    • Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...
    https://community.hwbot.org/topic/200180-eisbaer798-core-2-duo-e6300-44656mhz-9min-33sec-546ms-wprime-1024m/
    Go to topic listing

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.