lucasPeni Posted September 15, 2021 Share Posted September 15, 2021 I have 4x8 of G.Skill Ripjaw V rated at 3600mhz, but when I try to load the XMP profile of the RAM it causes massive instability. My cpu is an i9-11900kf and motherboard is an ASRock Z590-C/ac. Computer is perfectly stable without using RAM XMP profile. I have tried increasing the RAM voltage as high as 1.45v and no dice. Anything else I should try? Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted September 15, 2021 Crew Share Posted September 15, 2021 Raise SA voltage to 1.25, normally these frequencies should pose no problem for the processor integrated memory controller Quote Link to comment Share on other sites More sharing options...
lucasPeni Posted September 17, 2021 Author Share Posted September 17, 2021 On 9/15/2021 at 2:31 PM, lucasPeni said: I have 4x8 of G.Skill Ripjaw V rated at 3600mhz, but when I try to load the 192.168.1.254 XMP profile of the RAM it causes massive instability. My cpu is an i9-11900kf and motherboard is an ASRock Z590-C/ac. Computer is perfectly stable witho ut using RAM XMP prof 10.0.0.0.1 ile. I have tried increasing the RAM voltage as high as 1.45v and no dice. Anything else I should try? issue got solvedd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.