Rimmer Posted November 7, 2021 Posted November 7, 2021 (edited) Hello. I would like to share my colection of hardware I started colection as fun project to OC old hardware, but after cleaning and testing i put them back into box, because i'm scared of destroying them. ? Down below list of my stuff + some photo. MOBO ASUS Maximus Extreme (2) X38 Rampage Extreme x48 Rampage II Extreme x58 Rampage III Extreme x58 Rampage IV Extreme x79 Rampage V Extreme x99 Rampage VI Apex x299 Maximus V Formula z77 Maximus IX Apex (2) z270 Maximus X Apex z370 Maximus XI Apex z390 Maximus XII Apex z490 Maximus XIII Apex z590 Crosshair nForce 590 SLi Crosshair II Formula nForce 780a SLI Crosshair III Formula (2) 790FX Crosshair IV Extreme 890FX Crosshair V Formula 990FX Crosshair VIII Impact x570 MSI MSI P35 platinum MSI Z87 Mpower Max (2) MSI Z87 Xpower MSI Z97 Mpower Gigabyte GA-X58A-UD5 GA-X58A-OC GA-Z77x-UP7 GA-Z87X-OC Force GA-Z97X-SOC Force GA-X99-SOC Champion EVGA nForce 780i SLI X299 Dark FOXCONN FLAMING BLADE X58 GPU Asus 8800 GTS (320Mb) 9600GT (Lady) 9600GT Matrix 9800GT Matrix 9800GX2 GTX 260 3x Asus GTX 260 MAtrix GTX 285 Matrix 2x ok ,1x ded GTX590 (x2) GTX 760 Striker Asus x1950 XT HD4850 Matrix (2) HD4850 HD5870 Matrix Plat (2) HD 6990 HD7970 Matrix Plat R9 290x Matrix Plat GV-N26OC-896H-B GA-6870-SOC GA-460-SOC GA-470-SOC GA-GTX480 GA-GTX680-SOC Sapphire X1950 Pro Sapphire HD2600 XT Ultimate Sapphire HD3870 Ultimate Sapphire HD4850 Sapphire HD4850x2 Sapphire HD4870x2 Sapphire HD4870 Sapphire HD4870 Toxic Sapphire Vapor-X 5770 Sapphire HD5970 (2) Gainward 4870 Gainward Bliss GTX 260 GS 216SP Gainward 9800GTX+ EVGA GTX 260 EVGA GTX 980 SC EVGA GTX 690 N7600GT MSI N260GTX TwinFrozr OC (2) MSI GTX 295 (x2) MSi NX7900 gto Msi 6870 Hawk msi 460 hawk Msi 7950 OC/BE MSI 5770 Hawk (x2) GTX 750Ti PALIT XpertVision GeForce 8800GTX CPU AMD AMD Athlon 64 3400+ AMD Athlon 64 X2 4200+, AMD Athlon 64 X2 4800+, AMD Athlon 64 X2 5400+, AMD Phenom X4 9650, AMD Phenom II X4 955 BE, AMD Phenom II X2 550 BE, AMD Phenom II X2 560 BE, AMD Phenom II X4 960T, UNLOCK X6 FX8370 INTEL Pentium D 915, Pentium E5700, C2D E6700, C2D E6750, C2D E6850, C2D E8400, C2D E8400, Xeon x3430, XEON X5570, i3-530, I7-920, I7-920, I7-950, I7-960, I7-960, I7-975, i7-4930K, i7-5930K, i7-7700K, i7-8700K, i7-8086K, i7-9900K, i7-9900KF, C2Q Q6600, C2Q Q6700, C2Q Q9300, C2Q Q9550, (2) C2E QX6700, 2500K, 2600K, 3770K, G3258, G3258, 4670K, 4690K, 4790K, Edited November 12, 2021 by Rimmer 7 Quote
Rimmer Posted December 24, 2021 Author Posted December 24, 2021 So it is christmas so i decided to try some overclocking, with Maximus Extreme X38 , my second Rampage III Extreme with bent pin, Maximus V Formula Z77 and Z87 Mpower MAX where i fix MEM slot. I did not write down 775 CPUs i started at 1366 I7-920, rev.D0, 3951A411 oc 1.39V, FSB 200 - 4208MHz I7-950, rev.D0, 3029A962 oc 1.4V, FSB 195 - 4491MHz I7-960, rev.D0, 3103B554 oc 1.41V, FSB 178, 4283MHz 2500K, rev.D2, 3144A911 4.7-1.4V 2500K, rev.D2, L046B079 4.7-1.45V 2600K, rev.D2, L101B554 4.2-1.35V G3258, rev.C0, 3419B813 4.6GHZ-1.39V G3258, rev.C0, L417B973 4.8 GHZ -1.4+V 4670K, rev.C0, 3338C439 4.7GHz - 1.4V 4690K, rev.C0, L331C514 4.8GHz- 1.3V/ 4.9 - 1.39V 4790K, rev.C0, L436C555 4.8-1.3V/ 4.9-1.35V I don't know if it is because my R3E has that slightly bent pin but i can't fully screw my cooler or i lose 1 mem chanel. On z77 no problem and on z87 only 4690k did not want to boot and this was pain in the ass after fifth attempt i figure it out, dont screw it all the way down and bingo...boot. I was hoping to achieve 5G on some CPU but nope. I don't have good enough CPU to do it on Air. The 2600k was absolutely worst didn't want to boot at 2133MHz like my 2500k, only 1866MHz works and 4.2G on 1.35V even after pumping 1.46V it will not do 4.3G such a bummer. But what pains me most i have 3770k and i couldn't use it. Because 3gen has 1 millimeter bigger IHS than 4-7gen so i couldn't use my delid tool...sad. From all motherboards the Z87 Mpower MAX was best for me, simple to use i would even say better Bios than Asus. The Command center for in OS OC is really heavy tool but luckily i found Lite version and it work flawlessly. On other hand on Maximus Extreme x38 i didn't find any tool i could use from OS and getting TurboV work on R3E is easy its on website but Maximus V was chalenge it is not on website. There is so many version. TurboV, TurboV EVO, TurboV Core. Thanks Asus. So tried older version from Maximus IV-Z and it works but because it is older version maybe it could couse some issues?? Who knows. Initially i wanted Z77x-UP7 for testing but first time using GIGA Bios and not impressed. I couldn't figure out how set fans to 100% all the time, only in OS thru their software i could do only 90% better than nothing, but that software was piece of crap was heavy on resources and constant crashing. And all this was 4 days full of FUN Quote
Nik_PCMR99 Posted February 18, 2022 Posted February 18, 2022 If you are willing to sell any of those, i would be interested Do you need both X38´s? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.