rbuass Posted February 6, 2012 Posted February 6, 2012 GPU idle at ~1.55V ... benching -115 to -130 (no more than 130)... At full voltage decrease a lit bit... Quote
Faster Posted February 6, 2012 Posted February 6, 2012 @1610 não é brincadeira não hein....parabéns!!! Andre Yang que se cuide Quote
Hiwa Posted February 6, 2012 Author Posted February 6, 2012 GPU idle at ~1.55V ... benching -115 to -130 (no more than 130)... At full voltage decrease a lit bit... nice card Quote
rbuass Posted February 6, 2012 Posted February 6, 2012 Hi Phil... Vgpu, Vram, Vpll and Bios Asus3d.100...and OCP for sure Quote
rbuass Posted February 6, 2012 Posted February 6, 2012 No more than 1.15V pll is needed...and dangerous... I put 1.16 and VGA power off immediatly... lol .... not recommended... I kept 1.14 for security Quote
Hiwa Posted February 6, 2012 Author Posted February 6, 2012 i used 1.05 pll and nothing change up to 1.12, use lower bro better for ur vga life Quote
rbuass Posted February 6, 2012 Posted February 6, 2012 1.05 run all right... Only thing is that supports less cold... more PLL can give a lit bit more cold to VGA. Quote
Hiwa Posted February 6, 2012 Author Posted February 6, 2012 1.05 run all right...Only thing is that supports less cold... more PLL can give a lit bit more cold to VGA. strange to me u gain with lower temp (i loose stability too at -100 or lower), in my case lower than -80 nothing change, will try lower again... Quote
rbuass Posted February 6, 2012 Posted February 6, 2012 The another card (death) coud not run like this card... This card can not begin the bench more than 110... 115 to 130 is the range to pass. I am not sure that lower PLL can change ... but working fine at 1.12 for now. VGA can run 3d11 at 1650 mhz. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.