MTP04 Posted July 29, 2012 Share Posted July 29, 2012 Hey guys, I'm looking for a vmod that will give my cpu more than 2.1 volts with the TUSL2-C board. I have seen some results with 2.3+ volts but I can't seem to figure out how to do it. I already did the regular vcore mod, 50K VR to pin 22 and then to ground, but the most I get is ~2.08 volts. I need more. I even tried to mix the pin mod with the VR mod but the situation is the same. -David Quote Link to comment Share on other sites More sharing options...
BeepBeep2 Posted July 29, 2012 Share Posted July 29, 2012 http://www.xtremesystems.org/forums/showthread.php?167569-Problem-with-TUSL2-c-pinhole-mod&p=2663420&viewfull=1#post2663420 ? Quote Link to comment Share on other sites More sharing options...
MTP04 Posted July 29, 2012 Author Share Posted July 29, 2012 Hey Beep, my board has a different controller but either way I've done that style mod already and limited to about ~2.08v. Some people are giving 2.3+ volts and I'm not sure how?? Quote Link to comment Share on other sites More sharing options...
d3mox Posted July 29, 2012 Share Posted July 29, 2012 It's kind of magic Quote Link to comment Share on other sites More sharing options...
d3mox Posted July 29, 2012 Share Posted July 29, 2012 I'll show u pic tomorrow if i won' forget Quote Link to comment Share on other sites More sharing options...
MTP04 Posted July 29, 2012 Author Share Posted July 29, 2012 Hey d3mox, is it something to do with bypassing the VRM8.5? Anyway I hope you remember to post a pic. Quote Link to comment Share on other sites More sharing options...
d3mox Posted July 29, 2012 Share Posted July 29, 2012 Pm me, and i'll send pic to u Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.