Posted October 5, 201212 yr I have an problem with this Board. When i overclock Core 2 with this board, everything works fine, Voltage can be set to over 2V... But i now have many P4 CPUs here, and if i use any P4/Celeron CPU, i only can set max 1,4V in Bios. Trying to get higher in Windows dont work. Seems, that my board sets there an limit, if 90nm CPU is detected How can i fix this, maybee someone had an working Voltmod for me, because 1,4V isnt enough for me;)
October 6, 201212 yr I have an problem with this Board. When i overclock Core 2 with this board, everything works fine, Voltage can be set to over 2V...But i now have many P4 CPUs here, and if i use any P4/Celeron CPU, i only can set max 1,4V in Bios. Trying to get higher in Windows dont work. Seems, that my board sets there an limit, if 90nm CPU is detected How can i fix this, maybee someone had an working Voltmod for me, because 1,4V isnt enough for me;) Same problem here lol, not sure why they limited the options on P4
October 6, 201212 yr I think it would be really hard to have a voltmod that had to be tuned within a range of 0.6v. You would need switches and multiple resistors to get any accuracy. I mean..... if you used a single resistor, by the time you tuned to high volts, it would be so sensitive you could probably change the voltage by blowing on it :p
October 7, 201212 yr Author Voltmod was no Problem...But when i reach 1,5V, than OVP kickt in:( Think i will buy an other Board...
October 7, 201212 yr Author I only wqant to buy Gigabyte... http://www.gigabyte.de/products/product-page.aspx?pid=2453&dl=1#ov Its P965 Chipset, are there issuses with P4 or can i give there the Voltage, the CPU wants:)
October 7, 201212 yr same prob with my p45 ud3p that's I got me a p5e3 premium so can rape celerons Can't find any, when you get bored of yours call me
October 7, 201212 yr Can't find any, when you get bored of yours call me hehe yes sir, but not sure if u like a mobo with let and eraser
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.