Moose83 Posted February 2, 2014 Posted February 2, 2014 I need some infos about the Hotwire thing. My Asus GTX 780 Ti DC2 support Hotwire, but i dont like Asus Boards Is it possible, to connect the card direct to the Asus OC Panel and control Voltages Quote
TerraRaptor Posted February 2, 2014 Posted February 2, 2014 yes, possible. The only thing is every shutdown will make you set voltages again as the SATA power will be used without Asus mobo. Quote
Moose83 Posted February 2, 2014 Author Posted February 2, 2014 Ok, thats no problem, was only interested in if this is possible Thanks for the Info, so i dont have to do the last missing Mods with variable resistors :celebration: Is the VOltage complete open on that Panel, or are there some limits on max Voltages? Quote
RULE Posted February 2, 2014 Posted February 2, 2014 (edited) I've the same problem with Asus boards With 780 DC2 i've put to GND with a trimmer the 0v, is less expensive then buy a oc pannel. Yoou can find some tips here http://kingpincooling.com/forum/showthread.php?t=2346 It IS mandatory to remove PGR100, for go above 1,35v the mod is the same even with Ti DC2 Edited February 2, 2014 by RULE Quote
Moose83 Posted February 2, 2014 Author Posted February 2, 2014 I dont need infos for the Mods or an How to, only need infos if this Panel is voltage limited Quote
RULE Posted February 2, 2014 Posted February 2, 2014 how can be unlimited if the card is hardwere limited with a resistor? Quote
Moose83 Posted February 2, 2014 Author Posted February 2, 2014 You dont unterstand OCP Mods and Hotwire Mod allready done Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.