[The big MSI MOA 2012 Thread]

same here -115cb but mem goes just shy of 1900

 

somethings strange though with my card, I loose screen and bench continues like 7970 lol anyone else?

 

@ 1.6v 1880/1880 seems to be about it for 11...cpu only at 5ghz so could be a bit lower max but not bad...sucks to be around -100c though

[The big MSI MOA 2012 Thread]

smart move on their part, this should make things way easier now to try and convince them to let us keep the tool

[The big MSI MOA 2012 Thread]

damn Im only there from the 27th - the 1st you guys are making me jealous

[The big MSI MOA 2012 Thread]

after a couple 12 hour days on the board starting to get used to some quirks and learning to adapt to them. competition bios seems like the best so far which is nice. goodnight big bang II, see you in the morning friend. let me know if you need any extra blankets.

[The big MSI MOA 2012 Thread]

It's with the Kingston's 4x2GB 2400C11... the ones from the final I tried also with Dominator GTX8, the same

 

Matose try this mod should help, solved all my problems

 

Be advised, it did not work when the yellow was at the bottom position just so you know.

[The big MSI MOA 2012 Thread]

maybe bent pin or bad board

 

EDIT: Testing c2 right now, hopefully solves all my problems

[Storing GPUs]

I also want to know how to store them when they have the coolers on?

 

and what the best way to store CPU's as well?

 

Im starting to a collection and wonder the same thing..how do i store all this gear..

 

I did see what looked like a really interesting storage solution on OCN by one of the reviewers but cant find that picture..

 

I use to hang them on my wall in the garage, 2 nails that hold the card on the case bracket. but then sold them :I

 

Or on the ground in the corner of the garage

 

[The big MSI MOA 2012 Thread]

Anyone knows why I can't boot with 4 DIMMs installed? With only 2 it works fine...

 

I get that error when trying 4gb Dimms in anything other then single channel. Is this with 4gb dimms?

[The big MSI MOA 2012 Thread]

I think that they should provide each contestant with the Chil tool to control voltage and be done with no problem

[The big MSI MOA 2012 Thread]

thanks fester

 

So for me current issues are

 

CPU must be at x45 or lower to cold boot or will get 9A

-Must boot x45 or less first for the hard reset...then bump to x50 and is stable until power down.

-If power is cut, will get 9A hang

 

Control Center II on every bios chip asks for a reset to apply settings.

[The big MSI MOA 2012 Thread]

I had the 9A too. I can run 2400, but not 101bclk. Thought it was CPU issue

 

You under cold?

 

under water atm, will try chilled but I think its the c1 messing up (hoping)

[MSI GTX 680 Lightning...its here]

Im very behind on the gpu, so you use this new bios + the hardmod? gives you 1.4vid default then you force p0 state and raise voltage with AB but currently only 1.6*v max?

[The big MSI MOA 2012 Thread]

yeah thats 2333 is at 125bclk, any thoughts on the control center problems?

 

PSC 2400 divider = b4

Corsair hynix 2666 cas11 2400 divider = b3

kingston genesis Cold boot 2333 profile (that passes 32m) = 9A

 

ordered a c2 3930k to rule that out shiot is getting expensive!

[Just me trolling customs]

rofl

[Just me trolling customs]

1x kingpin tek 9

[The big MSI MOA 2012 Thread]

new bios memory still stuck under 2400 divider b4 code, sometimes 9A tried just about everything still max 2333mhz but will run tight so I dont think its the imc... I thought it was 2t vs 1t but it isnt.......maybe its my c1 chip by chance.....?

 

you can boot 2400 100bclk no problem?

[The big MSI MOA 2012 Thread]

V1.4 was better. V1.3 is great except the control center needing a restart

[The big MSI MOA 2012 Thread]

Why pay for a solution that is obviously just user error

 

You hurt my feelings

[The big MSI MOA 2012 Thread]

Fgured out my mem issue $5usd for each person that wants answer

[REQUEST HERE YOUR NICKNAME CHANGE PLZ]

My dyslexia disturbs me Do you really want?? It needs to be approved now, isn't it?

 

We all know who deserves it but M.Beacon is better, maybe.

 

I do, seriously

[The big MSI MOA 2012 Thread]

At final you always get 2

 

My results so far

[Born To Be Fast...ASRock Z77 OC Formula]

Yep, its actually CL7 but still looks cool lol

[REQUEST HERE YOUR NICKNAME CHANGE PLZ]

please change mine to Manmass

[The big MSI MOA 2012 Thread]

9A or 63/67 (b3 or b7 maybe?) should be VCCSA or memory related. I was trying to replicate the voltage issue with 4x 4GB GTX7 (which failed) and had 9A a couple of times too.

 

Did you enable "adjust CPU ratio in windows"? What about the Power Technology under CPU Features: custom or disabled?

I enabled adjust in windows but I have power technology disabled, maybe should be custom?

[The big MSI MOA 2012 Thread]

Im running the kingston genesis 4x2gb kit, 9A or 63/67 if I try to boot 2400...maybe its a 1.3bios issue will try 1.4 today again.

 

 

Any ideas why Control Center II is telling me to restart before the settings will take place mass? REALLLY appreciate your help with all this man, its been crazy trying to get this board to run and any feedback Ive sent to the motherboard dude there has been no response. (Probably because his inbox is full)