-
Posts
432 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Blogs
Posts posted by bartx
-
-
Pending payment
-
Please send me a PM's, I won't get a notice if you only leave a reponse in a thread. Thanks
-
Gigabyte EP45-UD3R in mint condition, pulled from daily rig. Rev. 1.0 with latest F12 bios.
Guarantee not DOA. Shipping worldwide. Paypal or bank transfer.
60 euro + shipping
-
sold, please move
-
Looks like GRIFF was first... (according to PM).
-
Rampage Extreme X48, all what I've got is on the pictures. Board has one little damage - one pin in the socket is broken (broken, not bent). I checked in datasheet, it's VID0 pin (see VID table), board works fine, set voltage is equal to the real voltage - no idea how it works, but it works.
Board is not tested in terms on FSB, it hasn't ever been on sub zero, pulled from daily PC.
I'm asking 90 euro + shipping, what is good price I think. Guarantee not DOA.
Paypal preffered. Shipping via post or DPD (in EU).
-
bump, P5E3 Deluxe and 7900GS are gone
-
offers welcome
-
P5E3 Deluxe sold
-
2x2GB Dominator GT 2000MHz CL8 - PSC
two sets, each 2x2GB for 30 euro + shipping
from my experience, they're rather average, but I haven't tested them for clock capability. Guarantee not DOA.
Modded 7900GS, mods list:
- vmem mod
- 8800GTX VRM with connected vsense directly to the back of the core
- two additional capacitors
- removed Primarion chip, which was responsible for OVP at ~1,8V
One result, which I made on this card is below. Consider that, it has been done on HR-03 + 120mm fan
Guarantee not DOA. 50 euro + shipping
bartx`s 3DMark2001 SE score: 87060 marks with a GeForce 7900 GS
8800GTX vrms... 3 of them were made for my friends, who never picked it up... I'm looking only for return of my expenses.
30 euro/piece including wires (8GA)
VGPU is working, VMEM needs removal of one resistor, which I'll do before shipping. They need vsense to be connected to the card - I'll provide the schematic. Boards don't have any short cicuits - cut using endmill on my CNC.
8GA wires - 2 euro/1m, I have couple meters I think
P5E3 Deluxe @ 660 FSB, mods list:
- vcore mod
- cap mod on the back
- P5E3 Premium bios
- voltage display (very convinient, especially with P5E3 Premium bios, which can mess vcore)
75 euro
http://hwbot.org/submission/2498457_bartx_reference_frequency_p5e3_deluxe_660.28_mhz
Prices does not include shipping. Bank transfer preffered, paypal gift is fine too.
-
For reballing need big big experience. It is science for itself. I talk about reballing with many people.
It's a conclusion is need very very expensive tool for reballing to do
that this thing done well. As far as I know Smoke do reballing for TEAM RUSSIA
It can be done with 150$ hot air station and 25$ electric grill as a heater. Trust me
Good flux, bunch of stencils and 60%tin/40% lead balls with proper diameter. It's not magic, just need some attempts and patience. Took me a month, day after day, to gain skills to resoldering gpus.Point is, that chips have factory defect. Reballing will help only for a while. That's why I forgot about it. You're doing the card and after a month it's a dead again. Sometimes it won't help at all.
-
1
-
-
I was doing it for some time, reballing and chip resoldering - couple years ago. Problem with those chips is, that chip is damaged itself, not balls below it. It may work for a week or two after this operation and die without any reasons.
It would be better to replace chips from working reference cards...
-
1
-
-
Hi,
I was wondering how much EP45T Extreme can be worth... I'll have one for sale in a few days.
Any suggestions?
-
Me too
I use Cu ETP, 99,9% pure copper. There is purer alloy CuOF (99,95%), but it's for sure more expensive and I'm almost sure that Intel won't use it in mass production due to price. -
First post updated
-
I let him know. He's friend of mine. Hopefully he will contact you guys
-
In case of casting, they should have some marks from ejector pins and mark in the place, where metal is injected. Like injection moulded parts. I'm not 100% sure, I was designing plastic automotive parts for some time, but never any die casted metal parts.
-
I checked a few retail IHS. I found that depth of pocket on bottom varies from .28-.38mm and flatness varies up too .05mm.
Exactly, thanks for that info. In my opinion IHS are stamped from huge copper sheet, just looking how the edges look like. It should be the cheapest process. Probably couple companies make them all the time, as long as they pass quality control and assumed tolerances it's all good.
-
I've lapped my Intel ES ihs, i can feel a bit difference like 20mhz ish, and less grase snap.
Inviato dal mio SM-A300FU utilizzando Tapatalk
According to some reports and my knowledge I think that quality of standard IHS may vary - remember that it's a mass production, so they have some tolerance range in dimmensions, flatness and surface roughness.
Not to mention, that spare IHS will for sure help keep all the markings on original IHS intact
-
Please put some comments here if possible how it works compared to standard one.
Silver IHS is abandoned due to very high price and most likely worse results than copper.
-
Yeah, run down of what is left would be awesome
First post updated about availability.
-
bump
-
So sad you are moving on bartx. Everyone who has seen or purchased stuff recently very happy. I know myself (chilly1 evap gpu mount) and another guy known as Allen love it. quality price etc and many of us US inventors are going to need another pro like you to work with.
I've worked 80hr in last 4 days so kinda lost on whats sold. but I'll buy chilly1 gpu mount, kaby ihs two of them and still need cpu holdown so maybe I can buy one of your 54mm versions and convert it myself
Thanks for such very kind words. I'm sending you a PM right now.
All rampots are gone, rest is still available, 1 or 2 IHS also should be available too.
-
Deal of the day - rampot + copper heatsinks - 10 euro discount from total price (90€ + shipping)
Two rampots left
[FS]Gigabyte EP45-UD3R
in Sold
Posted
Sold, please move