-
Posts
432 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Blogs
Posts posted by bartx
-
-
115 euro + shipping for Rampage II Extreme
-
REX sold
REX II left
-
2x1GB Dominators - sold
-
For sale Asus Rampage Exteme I & II boards. Both in mint condition, never tested on cold. I replaced the thermal paste below the heatsinks to MX-2 and made short tests. I probably will have I/O shield for Rampage II, but I cannot guarantee that.
2x1GB Dominators - D9 GTR chips
Prices:
1. Rampage Exteme X48 - 125 euro (I add E8400 for free)
2. Rampage II Extreme X58 - 125 euro (I add Xeon 5506 for free)
3. 2x1GB Corsair Dominator 1800MHz CL7 - 30 euro
Payment via PayPal (gift) or bank transfer. Guarantee not DOA. Cheap shipping - 15 euro for one board for EU, US and Canada, might be a bit more to other countries.
Contact - PM only, please don't write messages in this topic, because I don't get notification about them so, I won't answer.
- 2
-
Sold, please move. Thanks for the space.
- 1
-
650 euro + shipping
- 1
-
For sale is single stage cooler with 20000 btu rotary compressor. Unfortunately buyer haven't picked it up, so I have to make a listing here. It will be my last cooler, I run out of gas and I'm not going to buy a new bottle. All parts are of course new, quality as always
Picture on load tester means holding 400W dummy load with -47C on evap top and around -31C on the load tester (probe between the heaters). I think delta can be lowered using better thermal paste than MX-2. Unit can hold 400W in constant load and more for benchmarks.
Normal price will be 750 euro, I'm looking for 700 euro including GPU mounting kit (which costs 40 euro itself). So it's 90 euro discount.
Local pickup in Poland welcome (Silesia region, near Czech and Germany border), I can drop a price to 650 if unit will be picked up personally.
Shipping to EU only, cost around 100 euro, depends on location.
I'm going also to sell the load tester with regulation 150-600W if anybody is interested at example for cooler/water blocks testing.
- 6
-
1000 euro
-
For sale is Autocascade, which I made couple years ago. It's still working, charged with CO2 and holds around -65C @ 260W. Due to problems with captube clogging by CO2 (it's CO2 issue, not a cooler issue, I haven't had access to Ethylenne couple years ago), I can offer this cooler rebuilded (charged with Ethylenne and R600A with new suction line and new evap). I think after that modification it would be able to hold 300W load at -90C area.
19k btu comp with 1kw power consumption and size of the single stage (it's only taller). Expansion tank and plate heat exchanger between stages.
Anybody interested? I'm looking for 1200 euro for rebuilded cooler + shipping. Shipping also is a big advantage, because it can be shipped as 70kg package within EU (around 70-90 euro cost).
It will be available for around a month. Then I'm going to return the Ethylenne bottle and it won't be possible to buy it rebuilded.
And some pictures from build:
- 1
-
-
-
UPDATE
Cooling:
1. RAM Pot (nickel plated base, anodized alu extensions), for Dominator mounting holes -
60 euro(4 pieces) 50 euro2. NB Pot (with bracket, backplate and mounting holes) -
40 euro(2 pieces) 25 euro - 1 sold, 1 pending payment3. CPU Mounting Kit for phase change - 50 euro (3 sets)
4. Anodized alu backplates - 10 euro (3 pieces)
CPU:
1. E8400 Q820A
http://hwbot.org/submission/2487642_bartx_superpi___32m_core_2_duo_e8400_8min_20sec_906ms
Results has been done on autocascade in -70C temperature with poor old evap design.
50 euro + shipping25 euro + shipping2. E5200 Q839Bhttp://hwbot.org/submission/2452809_bartx_superpi___32m_pentium_e5200_8min_59sec_953msGolden CPU, perfect for make some good LN2 runs. It has been delided (indium below IHS).I can make an IHS for it for the buyer (included in price)50 euro + shippingSOLDRAM:
1. Corsair XMS3 1800MHz CL7 D9GTR -
50 euro + shipping30 euro + shipping pending payment2. Geil Ultra 2x256MB PC4000 -
20 euro + shipping10 euro + shipping pending payment3. OCZ PC3200 2x512MB Gold Edition, very low serial number, according to the info in the internet, Winbond BH-5 - 50 euro + shipping 30 euro + shipping4. Kingston HyperX PC3500 2x256MB Winbond BH-5 - 40 euro + shipping 25 euro + shipping5. Goodram Pro 2x512MB 533MHz CL4 Micron D9GKX -
30 euro + shipping15 euro + shippingAll the markings on the IC are shown, you can find some info in the internet about those.
Prices does not include shipping costs. I've got very good rates on overseas shipping (UPS), I can also ship via post. All items guarantee not DOA.
-
ANOTHER PRICE UPDATES
Cooling:
1. RAM Pot (nickel plated base, anodized alu extensions), for Dominator mounting holes -
60 euro(4 pieces) 50 euro2. NB Pot (with bracket, backplate and mounting holes) -
40 euro(2 pieces) 25 euro3. CPU Mounting Kit for phase change - 50 euro (3 sets)
4. Anodized alu backplates - 10 euro (3 pieces)
CPU:
1. E8400 Q820A
http://hwbot.org/submission/2487642_bartx_superpi___32m_core_2_duo_e8400_8min_20sec_906ms
Results has been done on autocascade in -70C temperature with poor old evap design.
50 euro + shipping25 euro + shipping2. E5200 Q839Bhttp://hwbot.org/submission/2452809_bartx_superpi___32m_pentium_e5200_8min_59sec_953msGolden CPU, perfect for make some good LN2 runs. It has been delided (indium below IHS).I can make an IHS for it for the buyer (included in price)50 euro + shippingSOLDRAM:
1. Corsair XMS3 1800MHz CL7 D9GTR -
50 euro + shipping30 euro + shipping2. Geil Ultra 2x256MB PC4000 -
20 euro + shipping10 euro + shipping3. OCZ PC3200 2x512MB Gold Edition, very low serial number, according to the info in the internet, Winbond BH-5 -
50 euro + shipping30 euro + shipping4. Kingston HyperX PC3500 2x256MB Winbond BH-5 -
40 euro + shipping25 euro + shipping5. Goodram Pro 2x512MB 533MHz CL4 Micron D9GKX -
30 euro + shipping15 euro + shippingAll the markings on the IC are shown, you can find some info in the internet about those.
Prices does not include shipping costs. I've got very good rates on overseas shipping (UPS), I can also ship via post. All items guarantee not DOA.
-
On 19.03.2018 at 2:14 PM, bartx said:
PRICE UPDATES
Cooling:
1. RAM Pot (nickel plated base, anodized alu extensions), for Dominator mounting holes -
60 euro(4 pieces) 50 euro2. NB Pot (with bracket, backplate and mounting holes) -
40 euro(2 pieces) 35 euro3. CPU Mounting Kit for phase change - 50 euro (3 sets)
4. Anodized alu backplates - 10 euro (3 pieces)
CPU:
1. E8400 Q820A
http://hwbot.org/submission/2487642_bartx_superpi___32m_core_2_duo_e8400_8min_20sec_906ms
Results has been done on autocascade in -70C temperature with poor old evap design.
50 euro + shipping35 euro + shipping2. E5200 Q839Bhttp://hwbot.org/submission/2452809_bartx_superpi___32m_pentium_e5200_8min_59sec_953msGolden CPU, perfect for make some good LN2 runs. It has been delided (indium below IHS).I can make an IHS for it for the buyer (included in price)50 euro + shippingSOLDRAM:
1. Corsair XMS3 1800MHz CL7 D9GTR -
50 euro + shipping35 euro + shipping2. Geil Ultra 2x256MB PC4000 -
20 euro + shipping10 euro + shipping3. OCZ PC3200 2x512MB Gold Edition, very low serial number, according to the info in the internet, Winbond BH-5 -
50 euro + shipping35 euro + shipping4. Kingston HyperX PC3500 2x256MB Winbond BH-5 -
40 euro + shipping30 euro + shipping5. Goodram Pro 2x512MB 533MHz CL4 Micron D9GKX -
30 euro + shipping20 euro + shippingAll the markings on the IC are shown, you can find some info in the internet about those.
Prices does not include shipping costs. I've got very good rates on overseas shipping (UPS), I can also ship via post. All items guarantee not DOA.
-
Everything is on the pictures.
Cooling:
1. RAM Pot (nickel plated base, anodized alu extensions), for Dominator mounting holes - 60 euro (4 pieces)
2. NB Pot (with bracket, backplate and mounting holes) - 40 euro (2 pieces)
3. CPU Mounting Kit for phase change - 50 euro (3 sets)
4. Anodized alu backplates - 10 euro (3 pieces)
CPU:
1. E8400 Q820A
http://hwbot.org/submission/2487642_bartx_superpi___32m_core_2_duo_e8400_8min_20sec_906ms
Results has been done on autocascade in -70C temperature with poor old evap design.
50 euro + shipping
2. E5200 Q839B
http://hwbot.org/submission/2452809_bartx_superpi___32m_pentium_e5200_8min_59sec_953ms
Golden CPU, perfect for make some good LN2 runs. It has been delided (indium below IHS).
I can make an IHS for it for the buyer (included in price)
50 euro + shipping
RAM:
1. Corsair XMS3 1800MHz CL7 D9GTR - 50 euro + shipping
2. Geil Ultra 2x256MB PC4000 - 20 euro + shipping
3. OCZ PC3200 2x512MB Gold Edition, very low serial number, according to the info in the internet, Winbond BH-5 - 50 euro + shipping
4. Kingston HyperX PC3500 2x256MB Winbond BH-5 - 40 euro + shipping
5. Goodram Pro 2x512MB 533MHz CL4 Micron D9GKX - 30 euro + shipping
All the markings on the IC are shown, you can find some info in the internet about those.
Prices does not include shipping costs. I've got very good rates on overseas shipping (UPS), I can also ship via post. All items guarantee not DOA.
-
PM sent
-
I'm looking for dead Haswell/Devil's Canyon CPU or IHS only.
Please send info on PM.
-
Pot customization for Direct Die
-
Due to some interest in direct die benching I made two direct die IHS last week to start this topic. Eventually I'd like to have this solution for Skylake-X, Kaby Lake-X and Coffee Lake (Kaby Lake and Skylake too). In this week I'm going to make another ones including the modification of the pot base.
I'll keep this topic updated.
-
It should be always done like this.
-
Expansion tank - to keep 2nd stage static pressure in safe range.
-
Looks great! Good to see you still doing stuff
Thanks
Nice1Ln2 Temps
Great
Price ?
Gesendet von iPhone mit Tapatalk
Priceless
-
Hello everyone,
Time to post something new in this section I'd like to show my latest cascade build. Took me a lot of time to make this, but finally build come to an end. It's big, noisy and powerful. I was able to reach -97C @ 360W load and -94C @ 400W. Should be enough for modern cpus... for some time
Enjoy
-
Any missing components somewhere? I had H55N USB which worked only with i3 due to some missing parts of the bottom.
[FS] Asus Rampage III Gene new one in box
in Sold
Posted
For sale never used Asus Rampage III Gene motherboard. I got it from a man who bought it as a spare one for his server and never used this board. There are no sign of dust or wear, because board spent couple of years in the box. I only replaced the battery. Two sata wires are missing (originally there were 4 pieces, I have only 2), rest is in the box. Board is in 100% working condition, guarantee not DOA.
I'm looking for 200 euro + shipping (15-25 euro, I can ship worldwide).
PayPal (gift) or Bank transfer