
FlashG
Members-
Posts
81 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Everything posted by FlashG
-
As I said before, it took me a long time to get this run. When I run this card on my 2700k I have both the proc and gpu in the same water loop ( see red water loop going to card in pic). When I run this card in the xeon machine, just the gpu is in the water loop. It is easier keep temps lower so the card runs better. I didn't measure volts, so don't have the answer to those questions. I am just starting to try hard volt mods, but haven't put any easy volt reading mods into my cards. I do this (hwbot) for fun and escape, not for attention or money. I moved to this league so I could just keep having fun. I was Thrilled with this run and it drew a lot of negative comments. I was very disappointed. I don't like getting that feeling from my hobby...
-
Aquarium chillers don't go below 4C. I don't have sub- zero outside temps to help with my water loop or air cooling so none of my runs are sub-zero. You may have full volt modded cards but if the loop is at room temp, they won't do well. It took me almost a full day to get that run, and even then the temps only came together in the evening. I will re-run when I can. Best, FlashG
-
I have an aquarium chiller in my water circuit (the second red loop you can see in the pic). Brings the temps down to 4C under right conditions, plus ducted AC cooling the rest of the card... but cooling temps always above zero. Overvolted with a shonky pencil volt mod, it runs pretty well. I'm not happy with the pencil volt mod so I'm working on hard volt mods now. I'll re-run when I can.. You get some pretty good runs on Air, with some of your GPU temps lower in your runs than I can get with chilled water. What's your secret? Best, FlashG
-
FlashG - Radeon HD 4870 @ 925/1170MHz - 87725 marks 3DMark03
FlashG replied to poparamiro's topic in Result Discussions
And a new water block -
FlashG - Radeon HD 4870 @ 925/1170MHz - 87725 marks 3DMark03
FlashG replied to poparamiro's topic in Result Discussions
Lotsa tuning and lotsa luck... -
FlashG - 2x Xeon E5 2687W V2 @ 3764MHz - 10885.97 pps HWBOT Prime
FlashG replied to Strat's topic in Result Discussions
I'm primed for more -
FlashG - Xeon E5 2687W V2 @ 4040MHz - 1488 cb Cinebench R15
FlashG replied to dhenzjhen's topic in Result Discussions
Thx... I put a lot of work into optimising to get this. -
borandi - Xeon E5 2687W V2 @ 3959MHz - 15.95 points Cinebench R11.5
FlashG replied to Dancop's topic in Result Discussions
It's hard to get over bclck 110. Be gentle with all voltages and keep trying.... Best FG -
FlashG - Xeon E5 2687W V2 @ 4040MHz - 16.81 points Cinebench R11.5
FlashG replied to dhenzjhen's topic in Result Discussions
Thanks... but, um, there's no need to rush -
FlashG - Xeon E5 2687W V2 @ 4040MHz - 1672 cb Cinebench R15
FlashG replied to dhenzjhen's topic in Result Discussions
It was a long night.... Fingers were tired -
dhenzjhen - Xeon E5 2687W V2 @ 4063MHz - 16.78 points Cinebench R11.5
FlashG replied to Joa3d43's topic in Result Discussions
Congrats!! Its hard to get close to 113 BCLK with a 2687 (v2). Well done...