nachtfalke
-
Posts
860 -
Joined
-
Days Won
8
Content Type
Profiles
Forums
Events
Blogs
Posts posted by nachtfalke
-
-
check the LN2 mode jummper -move to OFF( left side) and slow mod switch move to oFF
or install OS with LN2 mode enbled ..but push more vcore in cpu..for example 1.150v
when the LN2 mode is enabled ..the cpu is undervolting (0,994 v) and some cpu´s wont boot ../not anymore stable
i hope the info help you
-
want to prove that're HKEPC is all cheaters
-
+1 Aris , i´m agree with you , something here stinks
-
3223B829 1.4v+ 5ghz 4c/8htt = crap ..
-
M5F it is also very good choice, i waiting answer from intel rma netherlands about my ivy cpu´s..
Good Luck with raking:)
-
Thank´s , Yep :)it is good MB , all my cpu´s work very fine and low volt on this board...verry strong cpu VRM ,need more working on bios support for BBSE ram compatibility.. the 2D and 3D efficiency is verry similar with Asus boards ....need test soon with LN2:)
-
-
I liked it back in 2008 but now it's 98% about tweaks and 2% hardware. Imo this is not what a benchmark is about.
TRUE!!!
We can compare these "twik´s" as lucid virtu in 3D ...
hardware is useless here ..."Lucid Virtu PCM" power:D
-
it was very good arhitecture , but yet focus on IVY ...i wait answer from rma about my ivy cip´s:)
-
nice one man , gratz:)
-
i have same problem here , but is not vga ( tested with ~10 vga´s)is not mb( tested with 3 different mb) ..it is the cpu fault ...the pci-e controller inside the cpu is degraded( i think my last LN2 session damage it)
all gpu´s on this cpu work x8 pci-e1.1 ( on first mb slot -x16)... on second slot ( x8)gpu-z and bios read x2 1.1... i benching with agp on ivy=))))
these days i will send it to RMA
-
bravo, push the gpu freq more:) the new driver has great performance also on fermi cip:)
-
in 2k1 cypress arhitecture don´t scalling with gpu core ...you need high cpu clock:)
-
-
verry agressive voltage for SS:(
-
i have one too =))
nice work man:)
-
nice work man:)
-
-
hi, Sven...use new driver (285.xx)for G200 gpu , in 2k3 will have a better bost than 175.xx ...hint over 100k:)
-
i foget , instal rivarivatuner and set 3d3 overrider
-
hi:) use so:
install driver 275.33 or 28x.xx, driver on performance , also OS on performance
download inspector 1.9.4.1 and then:
"Open nvidia inspector and go to the elevated settings . The press the third button from the right "show unknown settings from nvidia predefined profiles" Then you will see some more options available . Search lower at the "unknown settings" There is an option "pre_d3d9_compatibility_bits" . Just pull the arrow and select the 0x00000040 option ." ( this is the principal tweak for fermi arhitecture in 2k1 and aqua)
set lod 3 in inspector
and run my GT : DL-LL-CH-DH-LH-N-CL ( this last 3-5 times)
enjoy:)
-
nice, congrats:)
-
HD5850 + eVGA epower board ...ready for LN2 soon:)
-
thx mate:) , this vga is gpu and ram crappy, but i have another 9600GT form ASUS TOP series, with Hynix ram ic´s ( can do over 1200mhz)..i hope have better gpu ...i will try very very soon on LN2..
stivut - Core i7 3770K @ 5154.5MHz - 1295.8 MPT-score UCBench 2011
in Result Discussions
Posted
vai ma coane , cand dai matale cat o submisie te umpli de puncte ca broasca de par=))))