mr.paco

Ticket ID: 1544 Priority: Medium Could you please add this Hewlett-Packard 0A80h mother board? http://valid.canardpc.com/show_oc.php?id=2436812 Thank you

Happens to me all the time too

Yes I meant to say your "Screen shot" not the actual validated run

Your score is actually 408.3. Where did you get 453.3 from?

Its an Acer Aspire 5251 LapTop. As far as "I" know its not an addon-card. Just asking; but why would it not be allowed in this comp if for example a laptop running a GMA 4500 is? Curious cause it only states that it has to be integrated & from the ATI Radeon HD 3000/HD 4000 series family. nothing about it being mobile or not. Maybe I'm misunderstanding something somewhere.

Getting error when trying to submit Ati Mobility Radeon HD 4250 Aren't mobiles allowed for this?

Could you give more info as to what the error was? Can you try again and if it errors, show here the error report. That way someone can see exactly what caused the error.

SWEET!!! Outstanding app, nice work...

Because based on your comment "how come I scored higher than you if I was clocked 500mhz lower than you". Thats why The point is, its NOT truly default if you check or un-check ANYTHING except for RUN BENCH I'm not much of 3d bencher dont know where that is going. but as far as the affinity tweak as you call it. Its not a tweak if all I did was to allow the bench to run longer with more thread count as in wprime If that was true, your question should have simply been: "Is it allowed?..." Period. As all the submissions till now have been allowed. I am no mod so I do not speak for them I can only say what has been told to me by them: It is allowed

Default Settings; interesting. All the bench marks here at Bot are to be run at default settings according to the rules BUT you are allowed to run em and are legit if in: 3D Mark 01 selecting a few tests and change the order they are ran etc 3D Mark 03 UN check CPU Test 3D Mark 05 UN check CPU Test 3D mark Vantage UN check FEATURE TESTs PC Mark 04 Too many to name PC Mark 05 WAY TOO many to name Wprime 32/1024 change thread count and so on. All NON default settings. These are just a few examples and UC Bench is no different, No special 3rd party application is being used. I have been running UC Bench since it was first introduced when there were no points given for it and in that time I have learned a few things about the bench, yes high cpu speed is essential BUT UC Bench is NOT 110% solely dependent on just CPU clock speed alone. So a 500mhz cpu difference is nothing when it comes to the end results. Its not what you run but how you run it. There are those that have ran UC Bench with cpus that have up wards of 16,32 even 64 threads at so called default settings and found that they had to change the line command. So whats the difference. I am not trying to defend uc bench or even my runs, but All of my runs on this or any other benchmark are done legit and if I feel its questionable believe me I do contact a mod before submitting it and get an OK or NO GOOD. With these runs mentioned (thank you btw, feels good to see that my efforts are noticed ) there is no bug, no illegal tweak or anything, its part of the bench mark. I dont see any one debating the non default settings in any of the other bench marks. But I guess sooner or later some one had to say $#!?... Why I cant score like that

So instead of asking me FIRST, you decided to report it as bugged run ... Was already checked and APPROVED by a moderator. Some folks have a helluva way to ask for tips/help/advice. To answer your question the way it was asked; I dont know, Try harder I guess.

Need CPUZ (memory & cpu tab)and GPUZ in screen shot

Nice work...

There are several threads about it. For now, some light reading for you, start with Massmans response on post #133 ... http://hwbot.org/forum/showthread.php?t=34005&highlight=ucbench&page=14

NICE

Ticket ID: 1538 Priority: Medium Could you help me to determine what GPU this is and what category to submit it in. Both GPUZ & Everest show it to be HD 2000 (GT2) BUT CPUZ shows it to be HD 1000 (GT1) http://valid.canardpc.com/show_oc.php?id=2403355 Thanx

Ticket ID: 1537 Priority: Medium Please add this Hewlett-Packard 1496 http://valid.canardpc.com/show_oc.php?id=2403355 Thank you

Yes it links fine now. Thank you very much Karl...

Fair enough Thanx

Is it correctable ?

:confused:Link please. Because all I find are: XFX nForce 780i 3-Way SLI http://hwbot.org/hardware/motherboard/nforce_780i_sli/ XFX nForce 780i SLI (links to the above) Evga nForce 780i SLI FTW http://hwbot.org/hardware/motherboard/nforce_780i_sli_ftw/ Evga nForce 780i SLI FTW The Black Pearl http://hwbot.org/hardware/motherboard/nforce_780i_sli_ftw_the_black_pearl/ Zotac nForce 780i Supreme http://hwbot.org/hardware/motherboard/nforce_780i_supreme/ I also see this EVGA Evga 132-CK-NF79 http://hwbot.org/hardware/motherboard/132_ck_nf79/ Same as mine, only mine is the "8" not the "9"

Ticket ID: 1535 Priority: Medium Could you please add this EVGA 132-CK-NF78 motherboard? http://valid.canardpc.com/show_oc.php?id=2402322 Thank you

Yeah its been about a week or so as well for me Also tryed: Nothing

Dont know if this has been addressed since there are a few places bug reports have submitted to. Is this a bug or are you guys messing with something? For the past few days I havent been able to click on "MEMBERS" list in team profile, then today when it did work I see this 155 submissions with only 8 pts "UP" down by THOUSANDS. Any ideas as to what caused this? And is there a fix? Thank you in advance for any help/info...

Thanx