Jump to content
HWBOT Community Forums

subaruwrc

Members
  • Posts

    1170
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by subaruwrc

  1. so low 3d perf maybe not bios related. I've tested an mve some days ago and it gave me a bad 3d performance ( 230fps 3d05 gt3 at 6.3ghz cpu with gtx 580 .. ) low score in 3d06 etc. I had some serious problems with board not giving signal to the monitor after an hour or two under subzero.. strange

  2. 3570K Batch 3221B905 test with LN2 not good...Cold boot at -85° and cold bug at -120°. Can do 5.7GHZ 1.785V 4c/4th, but good memory controller, 1351MHZ CAS 11-12-12-30 1T with GEIL EVO CORSA 2400MHZ CL11 @ 1.65v

     

    t171849_pi-1mb.jpg

     

    have you checked your coldbug above 105bclk as it should ?

     

    on topic

    3770K L223C207 #1 - 5ghz 4c/8t 1.392v / #2 1.344v

    testing it on ln2 on wednesday

  3. Difficult to figure out. I'm pretty sure all the 50+ scores are sort of 'bugged', but like a reproduceable readout bug or so.

     

    yeah, seems like a bit like the score jumping in maxmem because of bugged latency

     

    I got the jump, when booting at so 1866 7-9-8 etc etc with 4200mhz cpu

    run the latency test once, than raise the cpu freq to 4600mhz, then rerun, it gave me 26+ instead of 22.598 which was standard. but another run on 4.6gig gave only 22.598 again.

     

    sorted out, this single sandforce ssd is slow for hdd tests alone, so trying to figure out web page and text edit, but only minor improvement, lets say so 41+ at 4.9gig and 390 text edit which is far off from hard tweaked results..

    audio compression still off

  4. Did you set the HDD tests to the SSD Subaru ( in case you use two drives ) You should easily get around 160-200 XP startup with a new SSD. Write back enabled ? Areca is for pussies benchers, read as scores bought with cash :P

     

     

     

    /me starts to run from the wrath of SteveRo, Pro aka Dino22,37, l33t and Marc Beier :eek:

     

    I didn't get closer to the problem mate. Im using this single ssd as the system disk and run the benchmark only on it. Changed to a sata 6gb/sec port but nothing changed. I cannot find this write back cache option.

    Yeah areca, sure, worth more than the entire test system lol ..

×
×
  • Create New...