Jump to content
HWBOT Community Forums

Bullant

Members
 View Profile  See their activity

  • Posts

    509

  • Joined

  • Last visited

  • Days Won

    9

 Content Type 

Posts posted by Bullant

    Looking for resources on taking memory cold

    in Memory Heaven (air/extreme)

    Posted

    If your talking 32m on say ddr3, is no cbb or cb... on PSC pi gskill kits I've tested. I normally see trcd drop by 1 with each -40c drop, so say 7-11-7 at 2600mhz -20 .....7-10-7 at 2600 -60....7-9-7 at 2600 -100 .

     

    Also at -60 cl6 might be able to boot as well with trcd 10.....when trying to push mem freq keep tras little loose, if ok then start to tighten,same with Trfc.This goes same with 3rds, I see sometimes people tighten things to much that can restrict mem freq 

     

    It all does vary a little depending on platform and mem, temp. Most importantly cold mem is insulation, setup and don't go to cold to soon, like try -60 for awhile dialling in, then say try -100.If your insulation and setup is good you can bench for 3-4 hours......If you have moisture "water" dripping into memory slots then setup is wrong 

    • Thanks 2

    Bullant - Core i5 2500K @ 5300MHz - 6min 10sec 937ms SuperPi - 32M

    in Result Discussions

    Posted · Edited by Bullant

    Yeah memory ln2, memory will go more, could go 107+ blck at these timings I say  but cpu just wont post over 5.3Ghz.... no matter the combination

     

    hmmm it has me thinking now, the 2 core chips will run up to 109 blck with 2133 strap @ these timings....so will need to try the 2500k and see if can run that, just not sure it can...will try

    Need 5.8Ghz+ cpu ahah

     

     

×
×
  • Create New...