mirco69
-
Posts
55 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by mirco69
-
-
shipped to GER
-
Board is in Germany. Bought it used a while ago. As far as I can tell, it has never seen cold and the pins have never been bent. I used it daily for a while and benched it a few times on air. Never found something that does not work. Once got a fitting X58 Classy I/O-shield shipped for free from EVGA Germany but sold that with an X58 Classified.
Really liked using it but I want to get rid of stuff and hope that someone else has some space left in a drawer and fully appreciates this board. I really don't want it to be killed by some ham-fisted ln2 bencher.
I would like to avoid shipping to outside of the EU and would like to get 250 EUR shipped for it.
-
1
-
-
He's just a poor boy from a poor family
-
I often would like to know, how well binned a certain piece of hardware is. It would be nice if it became common to add some information about the amount of binning that was done to get hold of the chips.
-
1
-
-
is that OS allowed for submitting to hwbot?
-
On 6/4/2020 at 6:13 PM, TanteKaethe said:
32M on Clarkdale would be awesome
Clarkdale4life!
bring it
-
2
-
-
8 hours ago, Eisbaer798 said:Feel free to contact me via pn.?
mach ich ?️♂️
Does anyone have an opinion or information about OCZ Platinum 3x2GB with 2000 8-9-8 @ 1.65 V
-
1
-
-
Yes, when it comes to the Blades, its all about looks and rarity for me. OCZ always had great design imo and some heat sinks are high quality stuff. I.e. those ReaperX with flat heat pipes directly touching the chips. Also they have a rated speed of 1333 6-5-5 ?♂️
-
1
-
-
The only way to know for sure, is to remove the heat spreader and check the number, i guess.
-
On 4/4/2020 at 11:07 PM, Alex Bese said:
PSC-X
what does the X stand for? Are not all PSC created equal? ?
-
On 4/5/2020 at 12:26 AM, Mythical tech said:
I have a triple kit of mghe I might be willing to part with if you are interested in it.
what kit do you have exactly?
-
3 hours ago, Gigelz said:
Ofc there is more to say. Which version are you looking for ?
i do not necessarily plan to bench them (the really fast ones will not be for sale or affordable anyway). Just think that they are the nicest DDR3 kits out there and would like to own a dual or triple channel kit.
-
1
-
-
not much more to say
-
-
Image is a screenshot from the MSI livestream for new B550 boards. There are no pins of the DIMM slots visible on the back of the board. Does anyone have an expert opinion on this (extra costs, benefits) ? As far as have seen, it is the only AM4 board with this feature. The Crosshair Impact and X570I Aorus do not have it.
-
On 3/26/2020 at 9:12 PM, Leeghoofd said:
That's your way of interpretation... and it will not be correct for many... believe me...
So my room ambient is 21°C, my setup is inside but my radiator is outside at -15°c... Ambient temp or not ? How to judge?
Overclockers will bend rules to get any advantage.... it will never work as not everyone plays nice
On 3/27/2020 at 12:21 AM, ObscureParadox said:Actually that's exactly what I did when I started out benching. A bunch of my Socket 478 scores on water are done in winter, at night, with the window wide open in my room. Ambient probably about - 5c in my room. Even in Wales we don't get the chilly - 20c I dreamed of.
Okay. You changed my opinion. I was not aware of the extreme measures, that are used to "enhance" ambient coolers.
-
3 minutes ago, Mythical tech said:
You can already sort by cooling type
but not ambient/not ambient
edit: i don't see the point in separating ambient cooler types
-
On 12/22/2019 at 8:32 PM, Leeghoofd said:
Ow and who's exactly sponsored according you guys? The Top 10 of Elite ? Some others are reviewers, that just post scores with ES samples. So that changes nearly nothing. if we put these peeps in a seperate class. If there are sponsored OCers in enthusiast than these should be honest and move themsleves to Elite
Thing is we hope to make a big announcement soon about the future HWBot and some stuff will be altered and more important fixed
One of my working points witll be providing points to everybody iso doing a cutoff at a certain percentage, but its too early days.... till then we have to sit and wait the outcome of current discussions....
I don't want to buy subzero cooling but like to OC and like to compare my scores against other ambient scores. Sometimes it's interesting to see subzero scores too. Points and leagues are not really interesting for me, because i will only bench what i want and when i want. As long as there are points, there are spam submissions that no one is interested in, just for the sake of someone getting some points. Those are, what annoys me most about hwbot.
I would find it very useful to be able to filter scores by ambient/not ambient. Don't care if there are separate point systems, but it would be nice if hwbot could display an ambient ranking table. I think that's a compromise, even the most hardcore LN2 addict can live with.
cheers
-
10 hours ago, ground1556 said:
its fairly normal that hyper clocks lower then psc on clarkdale, no idea why but I’ve also never had luck clocking them high on that.
Also v2.1 1600c6, 1866c7, 2000c8, 2000c7 and 2250c8 as corsair are guaranteed hyper, though you typically want to run them as 6-7-5 or 7-7-6. 7-6-6 is not optimal.
i was wrong about 7-6-6. actually ran them with
7-6-6(edit) 7-7-6. thanks for the information. -
On 7/23/2019 at 9:23 PM, ground1556 said:
Anyone here has experience getting hyper to run with 32nm 1156 chips? We have a couple 650s and 550s here that won't post with hyper at anything beyond 800 MHz if even that while handling PSC at >1050 or so...
edit: and once again noting that almost nobody else running high QPI which makes it easy
Got a new Dominator GT 2000c888 v2.1 kit (don't know how to check, if they are really hypers. but should be) and that runs about 925 7-6-6 with i3 550 on M3F. It doesn't like voltage over 1.7 and gets weirdly unstable at higher clocks. Maybe the board sets some timings wrong? I didn't try for long.
That said, pretty much any other ram is running 1000+ and i get higher Maxxmem scores with PSC.
-
did you test PSC on the Board as well? I can't get more than 810 with PSC with my H55M-D2H
Edit: now i can get more than 810
-
should be caused by board/bios then? Or am i missing something? Until now, i only tested the Clarkdales with my H55M-D2H.
Edit: It seems to be a board/bios thing. In a short session, the M3F took PSC to 1000 without any problem.
Edit 2: H55M-D2H is now also able to do higher mem speeds. Just needed some VTT to become unlocked.
-
1
-
-
On 7/23/2019 at 9:23 PM, ground1556 said:
Anyone here has experience getting hyper to run with 32nm 1156 chips? We have a couple 650s and 550s here that won't post with hyper at anything beyond 800 MHz if even that while handling PSC at >1050 or so...
edit: and once again noting that almost nobody else running high QPI which makes it easy
I'm testing a few i3 550 and some new ram. with every chip, i hit a solid wall at 810 ram speed. This is with g.skill PSCs as well as my OCZ 2000c9 kit (which is probably PSC?!). Did you ever find out what this is all about? There are some sumbissions with ram at close to 1000...
Edit: more IMC voltage solved the problem
-
Delta fans in push-pull on a decent water loop is what i'd consider a relatively cheap and efficient ambient solution. What radiator size to choose, depends on money, space and the parts you want to cool.
[FS-EU] DDR4 SR A2; M7I
in For Sale
Posted · Edited by mirco69
added m7i
Hardware is in Germany. Boards will be shipped with CPU or socket protector installed. Payment preferably with paypal friends.
- X58A-OC_0; fully working; bought it bulk on ebay; used daily for a while did some ambient OC;
190170 EUR + shippingSOLD- Maximus IX Apex; fully working; pins shorted with soldering iron to allow flashing of custom bios (first picture in this thread: https://community.hwbot.org/topic/184577-asus-maximus-ix-apex-and-coffee-lake-cpus/?tab=comments#comment-508126 ); bought used from a gamer. used it for daily and 7350K ambient OC; comes only with IO-shield, driver CD and manual;
90 + shippingSOLD- P55 Classified; fully working; no accessories; used daily and for ambient OC;
170 160 + shippingSOLD- 3 x 2 GB Dominator GT Elpida Hyper; bought on ebay, fully working. Unfortunately, i dont know enough about hypers to tell you how good they are compared to other hypers;
110 EUR + shippingSOLD- Asus Maximus III Extreme; SATA6 port missing, a small inductor in the audio portion is damaged (core is broken loose, but the thing is still holding it's own weight and seems to work), thermal throttling has to be disabled in bios because otherwise the board runs lowest multi always. I replaced thermal pads and pastes. Comes with manual and I/O-shield;
120 EUR + shippingSOLD- 8086K; does 52 with delid and lm on air (maybe 53 on water); bartx nickel ihs glued on, caps under ihs are protected with paint; can also delid and clean before shipping;
200 EUR + shippingSOLD- Maximus 11 Apex_2; bought used from gamer. very good condition, looks like a new board. comes in box with all the accessories. could finish spi32 @ 2400 c12 with dancop profile, but cant produce the result reliably and didn't try for long;
250 EUR + shippingSOLD- Maximus 11 Apex_1; bought it bulk (came back from repair at asus) and used for ambient benching and mem testing. had some vaseline under the socket, but i cleaned that. always worked flawless;
190 EUR + shippingSOLD- Asrock Z170M OC Formula; Fully working; One thermal pad of the VRM-heatsink is missing. Debug code was defective and got replaced (green LEDs now);
190 EUR + shippingsold- X58A-OC_1; fully working; bought it bulk with the damaged pcie slot; also a few CPUs available for cheap;
150 EUR + shippingSOLD- i3 9350KF; does 52 without delid on air, ihs has scratches;
100 EUR + shippingsold- Asus Maximus VII Impact; fully working in very good shape, in box, all acessories included. 140 EUR + shipping
- Gskill OC 2019 RGB single rank B-die A2; bought on hwbot from alex_ro; seems to not like more than 1950mV, does 2066 c12 cr1 spi32 and did 2400 c14 cr2 spi32 with M11A_2; is very nice to work with and has no quirks i know of; trident heatspreaders are glued onto pcb on the chip side with double sided tape slightly thicker than the chips. thermal paste between heatsinks and chips, but no pressure on chips. silicone pad on non-chip side. grinded small indentations into heatsink where the rgb-leds are and covered them with electrical tape. so the heatsinks are attached to the pcb only and can be carefully removed without the danger of ripping off the chips. heating them up before is advised though. 200 EUR + shipping